Manual Hotpoint MF IDC (page 4 of 8) (English)

665377

Zoom out

Zoom in

1/8

or heated surface (including

kitchen hobs or hot plates).

13. The appliance has been designed exclusively for

heating, frothing and preparing milk-based beve-

rages. Do not use it with any other kind of uid

or solid in its container, unless indicated in the

included Recipes booklet, and in the suggested

quantities.

14. When using the appliance, always observe the

minimum and maximum level markings inside its

container.

15. The protrusion at the bottom of the container (mi-

nimum level mark) must always be covered by

milk. If insufciently lled with milk, the appliance

can overheat.

16. To prevent overheating, the appliance will auto-

matically switch itself off if used with the contai-

ner empty.

17. Overlling the container may also be hazardous,

since the frothed and heated milk can squirt out

of the container. We recommend using the lid

when operating the appliance.

18. Caution: The milk container heats up in use. Do

not touch its heated surfaces.

19. Always hold the container by its handle.

20. Do not leave the milk frother unsupervised when

it is operating.

21. Before using the appliance, carefully check that

it and its accessories are in good working order.

If, for example, it has been dropped onto a hard

surface or the power cord has been pulled too

hard, do not use the appliance: even damage

which is not evident to the naked eye can com-

promise the operational safety of the appliance.

22. Make sure that the appliance has been discon-

nected from its power outlet and that it is com-

pletely cool before cleaning it. For detailed infor-

mation on cleaning the appliance, please refer to

the section Maintenance and cleaning.

23. To avoid the risk of electrocution, never clean

the appliance with water and never immerse it

in water.

24. Children must not be permitted to clean or servi-

ce the appliance unless they are over the age of

8 and under adult supervision.

25. Do not leave the power cord hanging loose; keep

it away from the appliance’s heated parts.

26. Always disconnect the plug from the power outlet

• In case of malfunction,

• After use,

• Before cleaning the appliance.

27. Never pull the power cord to disconnect the plug

from the outlet, but grip the plug itself.

28. The manufacturer is not liable in any way for the

consequences of incorrect use or failure to follow

the provided instructions.

CONNECTION TO THE MAINS

The appliance must be connected exclusively to a re-

gulatory grounded power outlet. Make sure that the

mains voltage matches the appliance’s nameplate ra-

ting. This product is conforming with all mandatory CE

Mark directives.

FIRST USE

Remove all packaging material and check that all ac-

cessory parts are present. When rst using the ap-

pliance or after a long period of disuse, clean it tho-

roughly as indicated in the section Maintenance and

cleaning.

USER INSTRUCTIONS

We recommend using long life (UHT) milk with a high

fat content. For best results, take the milk out of the

refrigerator immediately before using it. The bottom

of the container and the contact area inside the base

must be clean and dry.

Selecting the whisk

• Use the smooth whisk for heating the milk.

• Use the toothed whisk for frothing the milk, whe-

ther hot or cold.

• Store the whisk not in use in the holder on the

back of the appliance.

Filling amount

• Always observe the minimum level marking and

make sure the container is lled with at least 80

ml of milk.

• To froth the milk, ll the container with no more

than 200 ml (lower maximum level marking ).

• To heat the milk, ll the container with no more

than 400 ml (upper maximum level marking ).

Setting the temperature

• to froth the milk without heating it

• to froth or just warm up the milk (baby milk)

• to froth or just warm up the milk (cappuccino

milk)

• for making hot chocolate from powder

For further details, see the Recipes booklet which can

be downloaded on-line.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint MF IDC in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hotpoint MF IDC Manual

Product: