670821

Hotpoint HIP4022 WGT - Ultima Manual

5
Zoom out
Zoom in
Previous page
1/12
Next page
5
EN
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
TABLET DETERGENT (All-in-one)
This setting allows you to optimize the performance of
the program according to the type of detergent used.
Press the TABLET DETERGENT button (the indicator light
will light up) if you use
All-in-one detergents
in tablet form
(rinse aid, salt and detergent in 1 dose).
If you use powder or liquid detergent, this option
should be off.
ZONE WASH
If there are not many dishes to be washed, a half loading
may be used in order to save water, electricity and
detergent.
Select a compatible program (see “Programs table”),
and then press the ZONE WASH button: the symbol of the
chosen rack will appear on the display:
(only lower rack selected)
(only upper rack selected)
By default the appliance washes dishes in all racks.
Option is OFF.
ZONE WASH 3D
Thanks to the additional 3D water jets placed on the bottom of
the cavity, ZONE WASH 3D option allows to save energy or to
increase the washing performance of the dishwasher.
It is compatible with Normal and Intensive cycles, and it
works with one rack at once.
• 3D ZONE WASH + NORMAL CYCLE: it allows to reduce
energy consumption up to 40%.
• 3D ZONE WASH + INTENSIVE CYCLE: it increases the
washing performances up to 40%. Ideal for very soiled
mixed loads, e.g. pans and saucepans, dishes with
heavy encrustation or difficult-to-clean crockery
(grater, vegetable mill, dirty cutlery).
How to activate the option:
1. Select a compatible cycle (Normal or Intensive)
2.Press 3D button to activate the option: a basket icon will
blink for a few seconds.
3.It is possible to change the selected rack pressing the
ZONE WASH button.
Remember to load the crockery in the selected rack
only.
WATER TAP CLOSED – Alarm
Flashes when there is no inlet water or water tap is closed.
TURBO
This option can be used to reduce the duration of the
main programs while maintaining the same washing and
drying performance levels.
Select a compatible program (see “Programs table”),
press the TURBO button and the indicator light will switch
on. To deselect the option, press the same button again.
EXTRA DRY
To improve the drying of the dishes, after selecting the
program, press the EXTRA DRY button and the indicator
light comes on.
A higher temperature during the final rinse and an extended
drying phase allow for improving drying. To deselect the
option, press the same button again. The EXTRA DRY option
results in the lengthening of the wash cycle.
START DELAY
The start of the program may be delayed for a period of
time between 0:30 and 24 hours.
1. Select the program and any desired options. Press the
DELAY button (repeatedly) to delay the start of the
program. Adjustable from 0:30 to 24 hours. When 24
hours is setting has been reached, press the START
DELAY another time to deactivate the START DELAY
function.
2. Press the START button and close the door within 4 sec.:
the timer will begin counting down;
3. Once this time has elapsed, the indicator light switches
off and the program begins automatically.
The START DELAY function cannot be set once a
program has been started.
LIGHT ON THE FRONT
A LED light projected on the floor indicates that the
dishwasher is working.
The light stays on during the cycle and switches off at the
end of the cycle.
If the delayed start was set, the light goes on for the entire
duration of the countdown.
This feature is active by default, but it is possible to
deactivate it in the “SETTINGS MENU”.
INTERNAL LIGHTS
When the feature is active the LEDs in the tub are
automatically switched on/off as soon as the user
open/close the door respectively.
If the door remains opened for more than 10 min, the LEDs in
the tub switch off (to turn them on again, the door has to be
closed and opened again).
This feature is active by default, but it is possible to
deactivate it in the “SETTINGS MENU”.
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times and beeps
will sound. The option will not be enabled.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hotpoint HIP4022 WGT - Ultima at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint HIP4022 WGT - Ultima in the language / languages: English as an attachment in your email.

The manual is 7,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info