Cottons (White Cottons): heavily soiled whites and resistant colours.60°1600
7
Cottons (Coloureds): lightly soiled whites and delicate colours.40°1600
7
Synthetics (Synthetics Resistant) (1st press of the button): heavily soiled resi-
stant colours.
50°800
3
Synthetics (Synthetics Delicate) (2st press of the button): lightly soiled resistant
colours.
40°800
3
Synthetics (Synthetics Delicate) (3st press of the button): lightly soiled resistant
colours.
30°800
3
Ready to Wear (2)
30°1600
1
Wool: for wool, cashmere, etc.40° 800
1,5
M
Memory: allows for any wash cycle to be stored.
Silk: for garments in silk and viscose, lingerie.30° 0-
1
Drying programmes
Cotton Dry (1st press of the button)--
--5
Synthetics Dry (2nd press of the button)--
--3
Wool Dry (3rd press of the button)--
--1,5
Partial wash cycles
Fast Spin cottons (1st press of the button)-1600
--7
Slow spin delicates (2st press of the button)-800
--3
Rinse cottons (1st press of the button)-1600
-
7
Pump out (2st press of the button)-0--7
Wash cycles and functions
Table of wash cycles
Wash functions
!If the selected function is not compatible with the
programmed wash cycle, the indicator light will flash
and the function will not be activated.
! If the selected function is not compatible with ano-
ther function which has been selected previously, the
indicator light corresponding to the first function
selected will flash and only the second function will
be activated; the indicator light corresponding to the
enabled function will remain lit.
Super Wash
Because a greater quantity of water is used in the initial
phase of the cycle, and because of the increased cycle
duration, this function offers a high-performance wash.
Reduced Creases
By selecting this function, the wash and spin cycles will be
modified in order to reduce the formation of creases. At
the end of the cycle the washing machine will perform slow
rotations of the drum; the “Reduced creases” and START/
PAUSE indicator lights will flash (orange) and the text “END
OF CYCLE” will appear on the display. To end the cycle, press
the START/PAUSE button or the “Reduced creases” button.
For the Silk/Curtains cycle, the machine will end the cycle
while the laundry is soaking; the “Reduced creases” and
START/PAUSE indicator lights will flash (orange) and the text
“RINSE HOLD” will appear on the display. To drain the water so
that the laundry may be removed, press the START/PAUSE
button or the “Reduced creases” button.
Note: If you also want to run the drying cycle, this button
is enabled only if combined with level “Iron Dry”.
Mini Load
This function is recommended for when the load of
laundry is equal to half, or less than half, of the maximum
recommended load (see Table of wash cycles).
Time Saver
Reduces the duration of the wash cycle.
(2) Ready to Wear
This cycle was designed to wash and dry lightly soiled small loads quickly. By selecting this cycle it is possible to wash and dry a maximum load of 1 kg
in just 60 minutes.
!
Please note, this is an automatically programmed wash and dry cycle, therefore it is not possible to manually set a drying time or
drying level in conjunction with this cycle.
For all Test Institutes:
(1) Test wash cycle in compliance with regulation EN 50229: set wash cycle (90°C); temperature of 60°C (Press TEMPERATURE button).
(1) Long wash cycle for cottons: set wash cycle (90°C); temperature of 40°C (Press TEMPERATURE button).
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to fac-
tors such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Hotpoint-Ariston WDD 756 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Hotpoint-Ariston WDD 756 in the language / languages: English as an attachment in your email.
The manual is 0,64 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
