513353

Hotpoint-Ariston LD 6090 EU Manual

20
Zoom out
Zoom in
Previous page
1/80
Next page
20
EN
Washing options*
Delayed start
It is possible to delay the start time of the cycle for a
period of time between 1 and 24 hours.
1. Press the MODE button: select the DELAYED
START symbol.
2. Press the SELECT button to select the desired
delay period.
3. Select the wash cycle by pressing the SELECT
WASH CYCLE button.
4. Press the START/RESET button: after the beep
sounds, the timer begins counting down.
5. Once this time has elapsed, the indicator light
switches off and the wash cycle begins.
To modify the delay and select a shorter period of
time, press the MODE and SELECT buttons to repeat
the selection process.
To cancel it, press the SELECT button repeatedly
until OFF appears on the display, the DELAYED
START symbol switches off, the wash cycle begins
and the WASH CYCLE PHASE indicator light
corresponding to the start of the cycle in progress
illuminates.
Half load using the upper or lower rack
If there are not many dishes to be washed, a half
load cycle may be used in order to save water,
electricity and detergent. Before selecting the wash
cycle:
1. Press the MODE button until the HALF LOAD
symbol has been selected.
2. Press the SELECT button, select upper half
loading, lower half loading or OFF (no selection).
3. Select the wash cycle by pressing the SELECT
WASH CYCLE button.
4. Press the START/RESET button; a beep will
indicate that the wash cycle has started.
Remember to load the selected rack only, and to
reduce the amount of detergent accordingly.
! It is better to use powder detergent in this case.
Auto Duo Wash Cycle
This is a special cycle that runs a differentiated
wash on the two racks: a delicate wash on the upper
rack and a more vigorous wash on the lower rack
(
see Table of Wash Cycles
).
1. Press the MODE button and select the special
DUO WASH cycle.
2. Press the SELECT button (ON means the cycle is
activated, OFF means it is deactivated).
3. Press the START/RESET button; a beep will
indicate that the wash cycle has started.
Extra drying
Before selecting a wash cycle press the MODE
button and select the EXTRA DRYING symbol.
Press the SELECT button; select ON to activate the
option and OFF to deactivate it.
Press START/RESET; a beep will indicate that the
wash cycle has started.
! The overall duration of the programme increases by
approximately 10 minutes when this function is
used.
This function is incompatible with the Soak cycle.
* Only available in selected models.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hotpoint-Ariston LD 6090 EU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint-Ariston LD 6090 EU in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info