Manual Hotpoint-Ariston KBT 6124 ID IX (page 18 of 60) (German, Dutch, French, Italian, Portuguese, Spanish)

74116

Zoom out

Zoom in

1/60

The safety devices

Pan recognition

Each induction cooking zone is fitted with a pan

recognition device. The cooking zone only provides

heat in the presence of a pan which is suitable for

the cooking zone.

A blinking pan recognition indicator could signal:

 that the pan is made of unsuitable material, which

is not ferromagnetic,

 that the diameter of the pan is too small,

 that the pan has been removed.

Always match the

diameter of the pan with thatdiameter of the pan with that

diameter of the pan with that

of the cooking zones.of the cooking zones.

of the cooking zones.

Warning: oval cooking zones

Oval cooking zones can only be boosted if the full

oval is enabled.

Do not place two small saucepans on oval cooking

zones.

What cookware to use

Given that induction only exists when the magnetic

field is sealed by a metallic recipient, the pan stops

being heated as soon as it is taken off the cooking

zone.

Use cookware made of material which is

compatible with induction (ferromagnetic

material).

Cast iron, enamelled steel or special induction

stainless steel saucepans are ideal.

Copper, ceramic, earthenware, glass, terracotta,

aluminium and non magnetic stainless steel

cookware is incompatible with induction cooking.

The easiest way to find out whether the pan is

suitable is with a magnet. If the magnet is

attracted by the pan bottom and stays stuck to the

same, the pan is made of ferromagnetic material

and can be used on your induction hob.

We recommend you use pans with a very flat and

thick bottom and avoid at all costs all cookware

with irregular rough bases which could scratch the

glass surface.

SUITABLE

UNSUITABLE

Cast iron

Enamelled steel

Special stainless steel

Copper,

Aluminium, Glass, Earthenware,

Ceramic, non magnetic Stainless steel

Acoustic signal

Anomalies such as:

 an object (such as a saucepan or a lid, etc.)

placed for more than 10 seconds on the control

zone,

 boiled-over liquids or food spilled on the control

zone,

 prolonged pressure on a key,...could cause a

beep to sound and the hob to turn off.

To stop the beep from sounding, remove the cause

of the malfunction.

To use the hob, turn it back on and re-select the

cooking zone(s) you wish to use. Set the desired

heating power.

Safety cut out

Your appliance is fitted with a safety cut out which

intervenes after a certain amount of time (see table)

depending on the power setting. When the safety

cut out has intervened, the power display indicates

0.

for example: the back right cooking zone is set to 5

and the front left zone is set to 2. The back right

zone will turn off after 4 hours of operation and the

front left zone will turn off after 6 hours of operation.

To unlock the controls, turn the hob off by pressing

the

key.

Power level Maximum duration of operation

1-2 10 hours

3 5 hours

4 4 hours

5-6 3 hours

7-8 2 hours

9 1 hour

Overheating protection device

Should your appliances electronic components

overheat, the hob will turn off automatically and a

will come up on the power level display.

The letter will disappear as soon as the temperature

drops back down to an acceptable level.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint-Ariston KBT 6124 ID IX in the language / languages: German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hotpoint-Ariston KBT 6124 ID IX Manual

Product: