Manual Hotpoint-Ariston AQD1071D 69 AQUALTIS (page 7 of 72) (English, German, Dutch, French, Portuguese, Spanish)

570651

Zoom out

Zoom in

1/72

WASH CYCLE

SELECTOR knob

Button with ON/OFF

indicator light

Touch control panel

Button with ON/OFF indicator light: press this briefly to switch

the machine on or off. The green indicator light indicates that the

machine is switched on. To switch off the Washer-dryer during

the wash cycle, press and hold the button for approximately

3 seconds; if the button is pressed briefly or accidentally the

machine will not switch off. If the machine is switched off during a

wash cycle, this wash cycle will be cancelled.

WASH CYCLE SELECTOR knob: may be turned in either

direction. To select the most suitable wash cycle, please refer

to the “Table of wash cycles”.

The knob will not move during the wash cycle.

M1-M2 buttons: press and hold one of the buttons to store

a cycle with your own set preferences in the memory of

the machine. To recall a previously-stored cycle, press the

corresponding button.

DRYING button : press to decrease or exclude drying;

the selected drying level or time will appear on the display

(see “How to run a wash cycle or a drying cycle”).

TEMPERATURE button: press to modify or exclude

the temperature setting; the value selected will appear on the

display above (see “How to run a wash cycle or a drying cycle”).

SPIN CYCLE button: press to modify or exclude the spin

cycle; the value selected will appear on the display above (see

“How to run a wash cycle or a drying cycle”).

DELAYED START button: press to set a delayed start for

the selected wash cycle; the set delay time will appear on the

display above (see “How to run a wash cycle or a drying cycle”).

OPTION buttons: press to select the available options. The

indicator light corresponding to the selected option will remain

lit (see “How to run a wash cycle or a drying cycle”).

WASH CYCLE PHASE icons: these illuminate to indicate

the progress of the wash cycle (Wash – Rinse – Spin/

Drain – Drying ). The text lights up when the cycle is

complete.

START/PAUSE button with indicator light: when the green

indicator light flashes slowly, press the button to start a wash

cycle. Once the cycle has begun the indicator light will remain

lit in a fixed manner. To pause the wash cycle, press the

button again; the indicator light will flash in an orange colour. If

the “LOCK” indicator light is switched off, the door may be

opened. To start the wash cycle from the point at which it was

interrupted, press the button again.

LOCK indicator light: indicates that the porthole door is

locked. To open the door, pause the wash cycle (see “How to

run a wash cycle or a drying cycle”).

CONTROL PANEL LOCK button with indicator light: to

activate or deactivate the control panel lock, press and hold

the button for approximately 2 seconds. when the indicator

light is illuminated, the control panel is locked (apart from the

ON/OFF button). This means it is possible to prevent wash

cycles from being modified accidentally, especially where there

are children in the home.

ECO indicator light: the icon lights up when, after altering the

washing parameters, an energy saving of at least 10% is made.

Furthermore, before the machine enters “Standby” mode, the

icon will light up for a few seconds; when the machine is switched

off the estimated energy saving will be around the 80% mark.

CHANGE LANGUAGEsThe first time the machine is

switched on, the first language will flash on the display. The

“ “, “OK” and “V” symbols will appear on the display, in line

with the 3 buttons on the right-hand side. The languages

change automatically every 3”; alternatively, they can be

changed by pressing the buttons next to the “ “ and “V”

symbols. Use the “OK” button to confirm the language, which

will be set after 2”. If no buttons are pressed, the automatic

language change will begin again after 30”.

To change the language, switch the machine on and off

again; in the 30” time period after it has been switched

off, press and hold the temperature +spin

+delayed start buttons simultaneously for 5’’. A short

sound alert will be emitted and the set language will flash

on the display. Press the buttons next to the “ “ and “V”

symbols to change the language. Use the button next to the

“OK” symbol to confirm the language, which will be set after

2”. If no buttons are pressed, the language set previously will

be displayed after 30”. Switch on the machine.

TEMPERATURE

button

OPTION

buttons

SPIN

button

DISPLAY

DRYING

button

ECO

indicator light

DELAYED START

button

START/PAUSE button

with indicator light

LOCK indicator light

WASH

CYCLE

PHASE

icons

CONTROL PANEL LOCK

button with indicator light

We have two Hotpoint Ariston Aqualtis AQD1071D 69 washer/dryers. Both have the same issue, they automatically start a new program (within ~5 mins) after the original one ended. So, unless we're waiting near the washer -- to end it manually -- it restarts the program, and spoils water and heat.
Additionally, both of them give the error "No water check supply" while in the 'middle' of certain programs. There does not seem to be real problem with the water supply, water is used in other parts of the programs, and if we ignore the error,the program just continues after a few minutes (and will automatically start a new program when done :)) Submitted on 4-3-2017 at 14:38
Reply Report abuse
- Ow, sorry, my question is if anybody has any idea on what creates this problem, and how this might be fixed? Answered on 4-3-2017 at 14:51
  Vote up Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint-Ariston AQD1071D 69 AQUALTIS in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 8,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hotpoint-Ariston AQD1071D 69 AQUALTIS Manual

Product: