570651

Hotpoint-Ariston AQD1071D 69 AQUALTIS Manual

6
Zoom out
Zoom in
Previous page
1/72
Next page
EN
6
3. extra compartment: Bleach
! The use of extra compartment 3 excludes the pre-
wash function.
washing additives compartment: for fabric softener
or liquid additives. We recommend that the maximum
level indicated by the grille is not exceeded, and that
concentrated fabric softeners are diluted.
TOUCH CONTROL PANEL
To adjust the settings, gently
press the icon inside the
sensitive (touch control) area
as illustrated in the figure.
Standby mode
This Washer-dryer, in compliance with new energy saving
regulations, is fitted with an automatic standby system
which is enabled after about 30 minutes if no activity is
detected. Press the ON-OFF button briefly and wait for
the machine to start up again.
Consumption in off-mode: 0,5 W
Consumption in Left-on: 8 W
PORTHOLE DOOR
Always use the handle to
open the porthole door (see
figure).
DETERGENT DISPENSER DRAWER
The detergent dispenser
drawer is located inside
the machine and can be
accessed by opening the
door.
For more information on
detergent measures, please
refer to the chapter entitled
“Detergents and laundry”.
1. pre-wash compartment:
use powder detergent.
! Before pouring in the
detergent, make sure that
extra compartment 3 has
been removed.
2. main wash compartment:
If liquid detergent is used,
it is recommended that the
removable plastic partition A
(supplied) be used for proper dosage.If powder detergent is
used, place the partition into slot B.
3
1
2
1
8
0
2
1
0
1
5
0
1
2
0
9
0
6
0
B
A
Description of the machine
CONTROL
PANEL
PORTHOLE DOOR
PORTHOLE DOOR
HANDLE
KICK STRIP
ADJUSTABLE FEET
… 6 …


Need help? Post your question in this forum.

Forumrules
1

Forum

hotpoint-ariston-aqd1071d-69-aqualtis

Reset search

  • We have two Hotpoint Ariston Aqualtis AQD1071D 69 washer/dryers. Both have the same issue, they automatically start a new program (within ~5 mins) after the original one ended. So, unless we're waiting near the washer -- to end it manually -- it restarts the program, and spoils water and heat.
    Additionally, both of them give the error "No water check supply" while in the 'middle' of certain programs. There does not seem to be real problem with the water supply, water is used in other parts of the programs, and if we ignore the error,the program just continues after a few minutes (and will automatically start a new program when done :)) Submitted on 4-3-2017 at 14:38

    Reply Report abuse

    • Ow, sorry, my question is if anybody has any idea on what creates this problem, and how this might be fixed? Answered on 4-3-2017 at 14:51

      Vote up Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hotpoint-Ariston AQD1071D 69 AQUALTIS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint-Ariston AQD1071D 69 AQUALTIS in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 8,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info