Manual Hot Spring PRODIGY - H (page 16 of 48) (English)

624653

Zoom out

Zoom in

1/48

Page 13

operatInG InStructIonS

WIreleSS remote control panel

(GRANDEE & ENVOY models only)

WIRELESS REMOTE CONTROL

OPERATING YOUR REMOTE

The HOT SPRING Wireless Control

Panel features a full color LCD

touchscreen to operate all spa

functions and features, wireless

communication to the control system,

and wireless charging via the bartop

docking tray.

• The wireless remote control panel should be placed in the docking

tray when not in use.

• Remote control can be placed into docking tray facing either direction.

• Maximum recommended operable distance between remote and

dock is 30 feet. Any obstructions between remote and dock may

prevent the remote from communicating, including through the spa

water.

• A convenience tray on the bartop is available as a secondary

placement location while spa is in use. The remote should always

be returned to the docking tray before placing cover over your spa.

BATTERY

For best battery performance, place the wireless remote back in the

charging dock when not in use. When not in dock, even in sleep mode,

the battery will consume power.

If battery is depleted, return remote control to the dock for immediate

recharging.

When returned to the dock, all spa functions will be operable but the

remote should remain in the dock until fully charged. Under normal

conditions a fully drained battery will take 6-8 hours to recharge.

Contact your authorized HOT SPRING Dealer for replacement of your

Lithium Ion battery.

CARE OF YOUR REMOTE:

Use only a clean microfiber cloth and water to clean your LCD screen.

Abrasive cloths, towels, paper towels, and similar items may cause

damage to the remote screen. Don't use around aerosol sprays, solvents,

or abrasives.

WIRELESS REMOTE DISPLAY TIME OUTS:

The remote screen will dim after 1 minute and sleep after 5 minutes.

* Remote will only shut down if it is NOT in the docking station for 24

hours. To restart, press the touchscreen and wait for 40 seconds as

remote re-boots and loads screens.

HOME SCREEN

The Home screen is the default screen. The temperature displayed inside

the Home screen is the actual temperature of the spa water.

Home Screen

Functions

Home Screen Features

Temperature

Control

{

Status

Indicators

Home Screen Functions:

Power Button

Press this icon to turn jets on

high and all lights on blue if both

are currently off, or will turn all

jets, lights, and music off if those

features are currently on.

Memory

Screen

Press this icon to access the

Memory screen.

Clean Cycle

Press this icon to access the Clean

Cycle screen. Icon will flash when

Clean Cycle is on.

Settings

Screen

Press this icon to access the first

Settings screens.

Home Screen Features

Jets

Press this icon to access the Jets

control screen.

ACE

If installed, press this icon to

access the Water Care screen.

When activating a function or feature, press

with a light but distinctive touch, the function

or feature will activate as your finger is

removed from the touchscreen.

VERY IMPORTANT: Your wireless remote is a high tech device

designed for use in your spa, handle accordingly!

• The wireless remote control (IP67 rated) is immersible and

floatable if it is inadvertently dropped into the spa water.

• Never immerse or float remote in the spa for any extended period

of time.

• Do not allow remote to float inside filter area. Extreme turbulence

and impact can render the remote permanently inoperable.

• Dropping the remote on any hard surface may break the screen

rendering the remote permanently inoperable. Physical abuse is

not covered under warranty.

• Remote control will NOT communicate to spa dock if underwater.

• Remote should NOT be docked or stored in ambient temperature

ranges outside of -20º F to +122º F (-30º C to +50º C).

• Radio environments will vary and may occasionally lose

connection between remote and spa. This is normal and should

self-correct within a few seconds. If loss of communication

persists, consult Troubleshooting section.

• Do not leave remote exposed to direct sunlight for long periods of

time, as solar heat could cause issues with the touch screen.

Operating Instructions

1 minute

5 minutes

24 hours

Full

Dim

Sleep *Shut down

I have a 2001 prodigy and the circulation pump doesn’t seem to come on. And now cold weather the jets poor out very cold water. What could this be? Submitted on 18-10-2022 at 15:54
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hot Spring PRODIGY - H in the language / languages: English as an attachment in your email.

The manual is 6,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hot Spring PRODIGY - H Manual

Product: