Manual Hot Spring PRODIGY - H (page 6 of 48) (English)

624653

Zoom out

Zoom in

1/48

Page 3

AVOIDING THE RISK OF SKIN BURNS

• To reduce the risk of injury, before entering a spa the user should

measure the water temperature with an accurate thermometer.

• Test the water with your hand before entering the spa to be sure it’s

comfortable.

SAFETY SIGN

Each HOT SPRING spa is shipped with a SAFETY SIGN in the owner’s

package. The sign, which is required as a condition of Product Listing,

should be permanently installed where it is visible to the users of the

spa. To obtain additional SAFETY SIGNS, contact your HOT SPRING

dealer and request Part #70798.

IMPORTANT

SPA INSTRUCTIONS

The following contains important spa information, and we strongly

encourage you to read and apply them.

DO:

• Use and lock the vinyl cover when the spa is not in use, whether it is

empty or full.

• Follow the Spa Care and Maintenance recommendations stated in this

manual.

• Use only approved accessories and recommended spa chemicals and

cleaners.

DON'T

• Leave the HOT SPRING spa exposed to the sun without water or the

cover in place. Exposure to direct sunlight can cause solar distress of

the shell material.

• Roll or slide the spa on its side. This will damage the siding.

• Lift or drag the vinyl cover by using the cover lock straps; always lift or

carry the cover by using the handles.

• Attempt to open the electrical control box. There are no user

serviceable parts inside. Opening of the control box by the spa owner

will void the warranty. If you have an operational problem, carefully go

through the steps outlined in the Troubleshooting section. If you are

not able to resolve the problem, contact your authorized HOT SPRING

dealer. Many problems can easily be diagnosed over the telephone by

an Authorized Service Technician.

SPA SHELL

Your HOT SPRING spa has an acrylic shell. Stains and dirt generally

will not adhere to your spa’s surface. A soft rag should easily remove

most dirt. Most household chemicals are harmful to your spa’s shell

(see below for detailed information on cleaning agents). Always rinse off

any spa shell cleaning agent with fresh water.

IMPORTANT:

1. The following products are the ONLY approved cleaning agents

for your HOT SPRING spa shell: plain water, HOT SPRING

FRESHWATER Spa Shine, Brillianize

or Soft Scrub

. The use of

alcohol or any other household cleaner other than those listed to

clean the spa shell surface is NOT recommended. DO NOT use any

cleaning products containing abrasives or solvents since they may

damage the shell surface, specifically: Simple Green

, Windex

Spa Mitt. NEVER USE HARSH CHEMICALS! Damage to the shell

by use of harsh chemicals is not covered under the warranty. Always

rinse off any spa shell cleaning agent with fresh water.

2. Iron and copper in the water can stain the spa shell if allowed to go

unchecked. Ask your HOT SPRING dealer about a Stain and Scale

Inhibitor to use if your spa has a high concentration of dissolved

minerals. (Watkins recommends FRESHWATER Stain & Scale

Defense.)

3. Keep all cleaners out of the reach of children and use care when

applying.

Safety Information

SAVE THESE INSTRUCTIONS

I have a 2001 prodigy and the circulation pump doesn’t seem to come on. And now cold weather the jets poor out very cold water. What could this be? Submitted on 18-10-2022 at 15:54
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hot Spring PRODIGY - H in the language / languages: English as an attachment in your email.

The manual is 6,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hot Spring PRODIGY - H Manual

Product: