764139
15
Zoom out
Zoom in
Previous page
1/106
Next page
www.hortensus.eu
14
10 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power plug.
Keep the ventilation slots of the tool clean to prevent overheating of the engine.
Regularly clean the tool housing with a soft cloth, preferably after each use.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
11 STORAGE
Never leave material in the blower-vac suction tube or collection bag.
12 TROUBLE SHOOTING
Please check below chart for the observed symptoms to solve problems with your machine
Problem
Possible Cause
Action
The engine does not
start
The machine is not connected
to the mains
Plug the machines to the
mains.
Damaged cable
Take the machine to the
after sales agent. Never
repair the cable with tape.
The machine is not completely
mounted
Mount the tubes and the
catcher.
Damaged switch
Take the machine to the
after sales service
The machine does not
blow
The lever of the machine is on
vacuum mode.
Put the lever on the blowing
position.
Ventilator obstructed.
Remove the tube and clean
the ventilator.
Tubes obstructed
Clean the tubes
The machine does not
vacuum
The lever is on blowing mode.
Put the lever on the vacuum
position.
Ventilator obstructed.
Remove the tube and clean
the ventilator.
Tubes obstructed.
Clean the tubes
If the problem cannot be solved using above chart than please contact your after sales agent.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hortensus BVM-9SPK-850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hortensus BVM-9SPK-850 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info