764139
14
Zoom out
Zoom in
Previous page
1/106
Next page
www.hortensus.eu
13
8.4 Switching operating mode (Fig. 7.1 )
To switch the tool from blower mode to vacuum mode, simply switch it off at the main switch
and move the function selector lever to the other position :
Lever to rear of machine (move lever upward) = vac. (suction)
Lever towards front of machine (move lever downward) = blow
As blower
Inspect the area to be worked before starting. Remove any objects that could be thrown,
jammed or become entangled in the blower-vac.
The blower-vac can be used to blow debris from patios, paths, driveways, lawns, bushes,
borders etc.
Work away from solid objects.
As Vac
Do not attempt to pick up wet debris, allow fallen leaves etc, to dry out first.
Your blower-vac will pick up leaves, paper, small twigs and wood chippings. These are sucked
up the tube. Before being ejected into the collection bag, they pass through the suction fan and
are partially shredded. Shredded organic material is ideal to use as mulch around plants.
Warning! Any hard objects, such as stones, tin cans glass etc, will damage the
suction fan!
8.5 Collection bag
Note: Before you remove and empty the collection bag ensure that the tool has
been disconnected from the mains power supply.
To empty the collection bag simply open the zipper, empty the bag and then close the zipper
again.
When the collection bag is open you can also check the function of the blower vac’s slide
control. If there is a blockage in the tool, check this function and remove the blockage.
9 RESIDUAL RISKS
Even when the tool is used as prescribed it is not possible to eliminate all residual risk
factors.
The following hazards may arise in connection with the tool's construction and design:
Damage to lungs if an effective dust mask is not worn.
Damage to hearing if effective hearing protection is not worn.
Health defects resulting from vibration emission if the power tool is being used over longer
period of time or not adequately managed and properly maintained.
WARNING! This machine produces an electromagnetic field during operation.
This field may under some circumstances interfere with active or
passive medical implants. To reduce the risk of serious or fatal injury, we
recommend persons with medical implants to consult their physician
and the medical implant manufacturer before operating this machine.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hortensus BVM-9SPK-850 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hortensus BVM-9SPK-850 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info