459144
5
Zoom out
Zoom in
Previous page
1/46
Next page
8 04.2007 TR10A041-C RE
1.2.2 Carrying out the installation work
Note
The fixing materials supplied must be inspected for suit-
ability for the specific place of installation by the person
carrying out the installation.
The clearance between the highest point of the door
and the ceiling (also when the door is opening) must
be at least 30 mm (see fig. 1.1a/1.1b ). If clearance is
inadequate, the operator may also be installed behind
the opened door, provided sufficient space is available.
In such instances, an extended door link must be used
(to be ordered separately). The garage door operator can
be positioned off-centre by max. 50 cm, the exception
being sectional doors with high-lift tracks ("H" tracks),
where a special track fitting is required.
The required power outlet should be installed at a dis-
tance of approx. 50 cm from the operator head.
Please check these dimensions!
1.3 Warnings
Permanently installed controls (such as
push-buttons, switches etc.) have to be
installed within sight of the door but well
away from any moving parts at a height
of at least 1.5 m. It is vital that they are
installed out of the reach of children.
Note
A sign warning about the trap hazard must be permanently
affixed at a conspicuous location or in the proximity of the
permanently installed push-buttons used to operate the
door.
Make sure that
- neither persons nor objects are located
within the door’s range of travel.
- children do not play around with the
door system.
- the rope of the mechanical release on
the carriage cannot become entangled
in the ceiling’s support system or in any
other protruding parts of vehicles or the
door.
ATTENTION
For garages without a second access door, an
emergency release must be fitted to ensure
that there is no danger of getting locked out.
This must be ordered separately and its function
checked once a month.
ATTENTION
Do not allow anyone to hang bodily from the
pull rope with knob.
1.4 Maintenance advice
The garage door operator is maintenance-free. For your
own safety, however, we recommend having the door
system checked by a specialist in accordance with
the manufacturer’s specifications.
Inspection and maintenance work may only be carried
out by a specialist. In this connection, please contact
your supplier. A visual inspection may be carried out by
the owner.
If repairs become necessary, please contact your supplier.
We would like to point out that any repairs not carried
out properly or with due professionalism shall render the
warranty null and void.
1.5 Information on the illustrated section
The illustrated section shows installation of the operator
on a sectional door.
Where installation differs for an up-and-over door, this is
shown in addition.
In this instance, letters are assigned to the figures as
follows:
O
a to a sectional door and
O
b
to an up-and-over door.
Some of the figures additionally include the symbol
shown below, offering a text reference. This text reference
provides you with important information regarding installa-
tion and operation of the garage door operator in the
following illustrated section.
Example:
= see text section, point 2.2
In addition, in both the text section and the illustrated
section at the points where the menus of the operator
are explained, the following symbol appears to indicate
a factory setting or settings.
= factory setting
Copyright.
No part of this manual may be reproduced
without our prior permission. Subject to changes.
2.2
ENGLISH
5


Need help? Post your question in this forum.

Forumrules
1

Forum

hormann-supramatic-2

Reset search

  • Avrei necessità di riprogrammare il mio SupraMatic P 2 nennlast 225 N. Submitted on 23-3-2023 at 18:59

    Reply Report abuse
  • Tengo un supramatic E2 y quiero conectar una apertura por WiFi, quisiera saber a que conectores, va el modulo wifi Submitted on 28-9-2022 at 18:37

    Reply Report abuse
  • With my previous house I was able to connect additional mains (LED) internal garage lighting that operated in unison with the lighting on the Supermatic. Am I able to do this with the new Supermatic, and what connections do I need to use. Thanks VM Submitted on 16-2-2022 at 16:29

    Reply Report abuse
  • Hoe kan ik de garagepoort "ontkoppelen" van de ketting van de motorisatie om bij stroomuitval manueel te kunnen bedienen? Submitted on 10-5-2021 at 00:39

    Reply Report abuse
  • Good morning,

    We have a Hormann Supramatic E2. Very happy with it. This morning however, it closes fine but only opens about 40 cm. This from main button as remote control. Both have the same result. It will close without problem. We have unplugged it and replugged after a few minutes. The track appears to be clear and clean. There is a 5 in red appearing on main unit but I don't know if this is normal to be honest. Advice will be very welcome.
    Mariet Procter Submitted on 7-1-2021 at 11:20

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hormann Supramatic 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hormann Supramatic 2 in the language / languages: English as an attachment in your email.

The manual is 7,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hormann Supramatic 2

Hormann Supramatic 2 Usermanual and installation guide - German - 56 pages

Hormann Supramatic 2 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info