655870

Hormann ProMatic 2 Manual

24
Zoom out
Zoom in
Previous page
1/152
Next page
Some Figures include this symbol with a reference to a
Section of the text. There you will find important information
on the fitting and operation of the garage door operator.
In the example, 2.2 means:
2.2
See text Section 2.2
In addition, in both the text Section and the illustrated Section
at the points where the menu of the operators are explained,
the following symbol is shown that indicates the factory
settings:
Factory setting
Abbreviations used1.5
Colour code for cables, single conductors and
components
The abbreviations of the colours for identifying the cables,
conductors and components comply with the international
colour code according to IEC 757:
BN Brown WH White
GN Green YE Yellow
Article designations
HE 1 1-channel receiver
IT 1 Internal push button with
impulse button
IT 1b Internal push button with
illuminated impulse button
EL 101 One-way photocell
EL 301 One-way photocell
STK Wicket door contact
PR 1 Option relay
HSM 4 4-button mini hand
transmitter
HNA 18 Emergency battery
2 Safety Instructions
2.1 Intended use
The garage door operator is intended exclusively for the
impulse operation of spring-compensated Sectional and
up-and-over garage doors in the private/non-commercial
sector.
Note the manufacturer's specifications regarding the door and
operator combination. Potential hazards as outlined in
DIN EN 13241-1 are prevented by the design itself and by
carrying out fitting in accordance with our guidelines.
Door systems that are located in a public area and only have
one protective device, such as a force limit, may only be
operated under supervision.
The garage door operator is designed for operation in dry
areas.
Non-intended use2.2
Use in the commercial sector is prohibited.
The operator must not be used for doors without a catch
safety device.
Fitter qualification2.3
Only correct fitting and maintenance in compliance with the
instructions by a competent/specialist company or a
competent/qualified person ensures safe and flawless
operation of the system. According to EN 12635, a specialist
is a person with suitable training, specialist knowledge and
practical experience sufficient to correctly and safely fit, test,
and maintain a door system.
Safety instructions for fitting, maintenance, 2.4
repairs and disassembly of the door system
DANGER
Compensating springs are under high tension
See warning in Section
3.1
Fitting, maintenance, repairs, and disassembly of the door
system and garage door operator must be performed by a
specialist.
In the event of a failure of the garage door operator, a
specialist must be commissioned immediately for the
inspection or repair work.
Safety instructions for fitting2.5
The specialist must ensure that the applicable regulations on
occupational safety, as well as the regulations on the
operation of electrical devices, are followed during assembly
work. In the process, the relevant national guidelines must be
observed. Potential hazards as outlined in DIN EN 13241-1
are prevented by the design itself and by carrying out fitting in
accordance with our guidelines.
The garage door operator is designed for operation in dry
areas and therefore must not be fitted outdoors. The garage
ceiling must guarantee secure fastening of the operator. For
ceilings which are too high or too light, the operator must be
fastened on additional struts.
DANGER
Mains voltage
See warning in Section
3.6
WARNING
Unsuitable fixing material
See warning in Section
3.3
Danger to life from the rope
See warning in Section
3.3
Danger of injury due to unwanted door travel
See warning in Section
3.3
24
TR10A033-E RE / 03.2010
ENGLISH
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hormann ProMatic 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hormann ProMatic 2 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 7,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info