655870

Hormann ProMatic 2 Manual

23
Zoom out
Zoom in
Previous page
1/152
Next page
Dear customer,
We are delighted that you have chosen a high-quality product
from our company.
About These Instructions1
These instructions are original operating instructions as
outlined in the EC Directive 2006/42/EC. Read through all of
the instructions carefully, as they contain important
information about the product. Pay attention to and follow the
instructions provided, particularly the safety instructions and
warnings.
Please keep these instructions in a safe place and make sure
that they are available to all users at all times.
Further applicable documents1.1
The following documents for safe handling and maintenance
of the door system must be placed at the disposal of the end
user:
These instructions•
The enclosed•
The instructions of the garage door•
Warnings used1.2
The general warning symbol indicates a danger that
can lead to injury or death. In the text, the general warning
symbol will be used in connection with the caution levels
described below. In the illustrated Section, an additional
instruction refers back to the explanation in the text.
DANGER
Indicates a danger that leads directly to death or serious
injuries.
WARNING
Indicates a danger that can lead to death or serious injuries.
CAUTION
Indicates a danger that can lead to minor or moderate
injuries.
ATTENTION
Indicates a danger that can lead to damage or destruction
of the product.
Definitions used1.3
Hold-open phase
Waiting phase at the OPEN end-of-travel position before the
door closes during automatic timed closing
Automatic timed closing
Automatic timed closing of the door after a set time has
elapsed and after reaching the OPEN end-of-travel position.
DIL switches
Switches on the control print for setting the control.
Impulse control
With each push of the button, the door is started against the
previous direction of travel, or the motion of the door is
stopped.
Force learning cycle
A learning run during which the necessary forces for moving
the door are taught in.
Photocell
When actuating the photocell safety device during the
movement in the CLOSE direction, the door stops and
reverses. The hold-open phase is re-started.
Normal operation
Door movement with the taught-in travel distances and
forces.
Reference run
Door cycle towards the OPEN end-of-travel position in order
to set the home position.
Reverse cycle/safety reversal
Door travel in the opposite direction when the safety device or
force limit is activated.
Reversal limit
If the safety equipment is activated, gate travel is triggered in
the opposite direction (reverse cycle) up to the reversal limit
(max. 50 mm) shortly before the CLOSE end-of-travel
position. If this limit is passed, no reversal occurs to ensure
that the gate reaches the end-of-travel position without
disrupting travel.
Distance learning cycle
Door cycle with which the operator is taught the path of
travel.
Pre-warning time
The time between the travel command (impulse) and the start
of travel.
Factory reset
Resetting the taught-in values to the delivery status/ex factory
setting
Symbols used1.4
The illustrated Section shows how to fit an operator on a
Sectional door. Deviations for fitting with an up-and-over door
are also shown. For this purpose, the following letters are
assigned to the Figures:
a = Sectional door
b = Up-and-over door
NOTE:
All dimensions in the illustrated Section are in [mm].
TR10A033-E RE / 03.2010 23
ENGLISH
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hormann ProMatic 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hormann ProMatic 2 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 7,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info