606949
44
Zoom out
Zoom in
Previous page
1/50
Next page
44 SPEKTRUM DX7 • TRANSMITTER INSTRUCTION MANUAL
EN
Moving the Throttle Limiting Wedges
Throttle limiting wedges are used to limit the maximum throttle
travel. When changing between Modes 1 and 2, or between Modes
3 and 4, you must move the throttle limit wedges.
1. Move the gimbals a small amount to remove a screw and
wedge from the top and bottom of the throttle gimbal.
2. Install the wedges on the other gimbal using two screws.
Adjusting the Elevator Centering Screw
When changing between Modes 1 and 2, or between Modes 3 and
4, you must adjust the elevator centering screw.
1. Hold the Elevator or Throttle stick in the full up or full down
position when you are adjusting the elevator centering screw.
Holding the gimbal stick reduces the load on the elevator
centering mechanism and makes it easier to adjust the
centering screw.
2. Locate the gimbal where the elevator centering spring is
engaged. Use a Phillips screwdriver to tighten the elevator
centering screw. Tightening the screw will disengage the
centering spring.
3. Using a Phillips screwdriver, loosen the opposite elevator
centering screw until the lever engages.
Re-assembling the Transmitter
1. Put the rear of the transmitter case on the main case, taking
care to not pinch any wires.
2. Install and tighten the eight Phillips screws.
3. Reinstall the battery holder or optional battery.
4. Power on the transmitter. When a calibration screen shows,
move the control sticks to extremes and to centers as directed
to correctly calibrate controls.
PHYSICAL TRANSMITTER ADJUSTMENTS
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Horizon Hobby DX7 - 7 Channel DSMX Transmitter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Horizon Hobby DX7 - 7 Channel DSMX Transmitter in the language / languages: English as an attachment in your email.

The manual is 4,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Horizon Hobby DX7 - 7 Channel DSMX Transmitter

Horizon Hobby DX7 - 7 Channel DSMX Transmitter User Manual - German - 49 pages

Horizon Hobby DX7 - 7 Channel DSMX Transmitter User Manual - French - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info