606951

Horizon Hobby DX4C Transmitter Manual

12
Zoom out
Zoom in
Previous page
1/21
Next page
Spektrum DX4C • tranSmitter inStruCtion manual
EN
12
SUB-TRIM
The Sub-Trim function allows electronic adjustment or centering
of each servo to get the servo arm exactly perpendicular to the
servo, or in the exact optimum desired position. Minor sub-trim
values can be used to correct this offset inaccuracy. Sub-trim is
adjustable for all channels.
CAUTION: Use only small sub-trim values so a servo’s
maximum travel is NOT overdriven.
*Reference chart for options available for each channel:
A Channel
B Box shows around selected text
C Value for servo alignment (varies among channels)
* Range is 0 to 100 in both directions
Channel Description
Steering L (left) R (right)
Throttle B (brake) F (forward)
Aux 1 H (high) L (low)
Aux 2 H (high) L (low)
TIMER
The Timer function supports Up and Down timing. When started
by an assigned button, the time shows on the Main Screen.
Tip: Refer to Switch Screen instructions for assigning
a button to the Timer (Button E on the grip handle is
recommended).
Down timer – is the default timer type. The timer can be set in
10-second increments to count down from 10 minutes. Normally,
this timer is programmed for the length of a race. The timer’s
default setting is 5 minutes runtime for electric (battery capacity)
and gas-powered (fuel-tank capacity).
Start the timer by pressing the assigned timer button. When
the time expires, an alarm will sound (when Buzzer is not set to
OFF) and then begin to count up. To pause or continue the Down
timer, press the timer button once. To reset the Down timer to its
pre-programmed value, press and hold the timer button for more
than 3 seconds.
Up timer - is started by pressing the timer button and counts up
from 00:00 seconds, functioning as a stopwatch. The Up timer
is useful for timing a fuel run to determine fuel mileage/pit stop
strategy. The Up timer can also be used for electric vehicles to
time the run time of a battery pack for determining gear ratio and
setup. To pause or restart the Up timer, press the timer button. To
reset the Up timer to 00:00 press and hold the timer button for
more than 3 seconds.
NAME
Assign a name for a model memory in this screen. 10 characters
can be used to name a model. This name shows on the Main
Screen when an model memory is active.
Tip: You can only change a model name when the model
memory is active.
A Active model memory
B Model Name (10 character spaces available)
C Marker showing selected character
B
C
A
A Value for timer
B Box shows around selected text
C Options: Inhibit, Down and Up
A
A
B
C
B
C
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Horizon Hobby DX4C Transmitter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Horizon Hobby DX4C Transmitter in the language / languages: English as an attachment in your email.

The manual is 7,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Horizon Hobby DX4C Transmitter

Horizon Hobby DX4C Transmitter User Manual - German - 21 pages

Horizon Hobby DX4C Transmitter User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info