606950

Horizon Hobby AR7210BX - BeastX Manual

54
Zoom out
Zoom in
Previous page
1/59
Next page
EN
54
Menu Overview
GOVERNOR MENU
(Menu LED ashing slowly)
OFF
Purple
Flashing
Purple
Solid
Red
Flashing
Red
Solid
Blue
Flashing
Blue
Solid
Red/
Blue
A RPM sensor – Function test “nitro” mode: Status-LED blue when magnet passes sensor “electric” mode: Status-LED red when motor is running
B Throttle – Motor off/Idle position “nitro” mode: throttle servo to (increased) idle position “electric” mode: throttle in “motor o” position, just before motor starts
C Throttle – Full throttle position Set throttle channel/throttle servo to full throttle position
D Transmitter – Switch point display
RPM
Governor off
RPM
Governor
maximum
RPM
Governor on
RPM
Governor
autorotation
E RPM sensor – Divider 1 2 3* 4 5 6 7
F
Main rotor – Gear ratio
(Sum of F + G + H if not
“user defined”)
user defined 8 9* 10 11 12 13 14
G +0.00 +0.20 +0.40* +0.60 +0.80
H +0.00 +0.05 +0.10* +0.15
PARAMETER MENU
(Menu-LED is ashing quickly)
OFF
Purple
Flashing
Purple
Solid
Red
Flashing
Red
Solid
Blue
Flashing
Blue
Solid
A Cyclic and rudder trim/SAFE® trim
Use aileron and elevator stick to trim, hold button 2s to trim rudder. Reset all by rudder stick input.
Switch trim mode by activating SAFE® technology using the SAFE® switch channel.
B Control Behavior user defined normal sport* pro extreme transmitter
C Swashplate – Pitching up behavior user defined very low low medium* high very high
D Tail – Rate Consistency user defined very low low medium* high very high
E Stick deadband user defined very small small* medium large very large
F Tail – RevoMIX user defined off* low - nor high - nor low - rev high - rev
G Cyclic response user defined normal* slightly increased increased high very high
H Pitch boost user defined off* low medium high very high
I RPM Governor – Throttle response user defined normal slightly increased increased fast aggressive
J RPM Governor – Initial spool up rate user defined 50 RPM/s 100 RPM/s 200 RPM/s 300 RPM/s 400 RPM/s
K RPM Governor – Quick change rate user defined as initial rate 300 RPM/s 500 RPM/s 700 RPM/s 900 RPM/s
L SAFE®– Operation mode deactivated* Bail out rescue
Bail out rescue
with pitch
3D - Mode
3D - Mode with
pitch
Flight trainer
mode
M (SAFE® – Hovering pitch) Adjust by aileron stick input. Reset by rudder stick input.
SETUP MENU
(Menu-LED is steady ON )
OFF
Purple
Flashing
Purple
Solid
Red
Flashing
Red
Solid
Blue
Flashing
Blue
Solid
Red/
Blue
A Mounting orientation
horizontal
socket, front
vertical
socket, front
hor. inv.
socket, front
vert. inv.
socket, front
horizontal
socket, back
vertical
socket, back
hor. inv.
socket, back
vert. inv.
socket, back
B Swashplate – servo frequency user defined 50 Hz* 65 Hz 120 Hz 165 Hz 200 Hz
C
Rudder – center position pulse
length
user defined 960 μs 760 μs 1520 μs*
D Rudder – servo frequency user defined 50 Hz* 165 Hz 270 Hz 333 Hz (560 Hz)
E Rudder – servo endpoints Use rudder stick to move servo to right endpoint and wait, then left endpoint and wait (or vice versa)
F Rudder – sensor direction normal* reversed
G Swashplate – servo centering
reference
position
CH1 center
position
CH2 center
position
CH3 center
position
H Swashplate – mixer user defined mechanical 90° 120°* 140° 140° (1=1)
I Swashplate – servo directions nor | inv | inv nor | nor | inv* nor | inv | nor nor | nor | nor
J Swashplate – cyclic pitch geometry Use aileron stick to adjust 6° cyclic pitch on the roll axis to one direction (blades aligned with fuselage)
K Collective pitch range & endpoints
Set collective stick to max/min position and use aileron stick to adjust desired pitch.
Set pitch direction by rudder stick input: Status-LED blue = positive pitch, red = negative pitch
L
Swashplate – cyclic limit Move aileron, elevator and throttle stick. Adjust maximum limit by rudder stick input
M Swashplate – sensor directions inv | inv inv | nor nor | inv nor | nor*
N RPM Governor – Operation mode deactivated* electric nitro
*Factory setting
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Horizon Hobby AR7210BX - BeastX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Horizon Hobby AR7210BX - BeastX in the language / languages: English as an attachment in your email.

The manual is 4,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Horizon Hobby AR7210BX - BeastX

Horizon Hobby AR7210BX - BeastX User Manual - English - 176 pages

Horizon Hobby AR7210BX - BeastX User Manual - German - 64 pages

Horizon Hobby AR7210BX - BeastX User Manual - German - 176 pages

Horizon Hobby AR7210BX - BeastX User Manual - French - 57 pages

Horizon Hobby AR7210BX - BeastX User Manual - French - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info