606950
50
Zoom out
Zoom in
Previous page
1/59
Next page
EN
50
If SAFE
®
technology works reversed, e.g. one of the Menu-LEDs B through N lights up when
the switch for SAFE
®
technology is in “off”-position and the Menu-LED A does not disappear
independant of the servo throw when the switch is in “on”-position, then simply reverse the
channel for SAFE
®
technology in your transmitter by using the servo reverse function.
SAFE® Technology with Combined Switch Channel
The tail gyro gain channel is also used for SAFE
®
technology. In the switch position where
SAFE
®
technology is off, the channel deflection determines the amount of tail gyro gain as
usual. Increase or decrease the (servo) travel of channels to adjust the tail gyro gain. The
amount of tail gyro gain is indicated by the yellow Menu-LEDs each time after initialization
procedureandalwayswhenthegainchanges.HeretheStatusLEDlightsupBlue. When you
flip the switch and the channel is deflected to the other direction, the Spektrum AR7210BX will
keep the current tail gyro gain and activate SAFE
®
technology.HeretheStatusLEDlightsup
Red. When adjusting the height of deflection of the channel into this direction you can specify
the SAFE
®
technology gain by adjusting the servo travel. So here one channel is used for two
functions. Depending on the direction you can either adjust tail gyro gain or SAFE
®
technology
gain and by switching between directions SAFE
®
technology is activated or deactivated.
When using SAFE
®
technology with combined switch channel make sure
SAFE
®
technology is at least deactivated once before take off. Otherwise the
tail gyro gain would be minimal as the system would not have been able to determine your
tail gain adjustment after initialization.
In this mode it is absolutely necessary to use a switch that changes the control directions
directly and without intermediate steps. In particular, do not use a slider on the transmitter!
Otherwise, when you activate SAFE
®
technology the tail gyro sensitivity would be decreased to
0% before the system turns on the SAFE
®
technology. So you would have 0% of tail gyro gain
when SAFE
®
technology is active.
100%
-100%
0%
A
Menu-LEDs
Tail gyro gain channel
HeadingLock-Mode
(Status-LED: blue)
N M L K J I H G F E D C B
B C D E F G H I J K L M N
SAFE® Technology on
(Status-LED: red)
SAFE® Technology o
(Status-LED: red)
A
The tail gyro Rate-Mode is only available when SAFE® is operated with Separate Switch Channel.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Horizon Hobby AR7210BX - BeastX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Horizon Hobby AR7210BX - BeastX in the language / languages: English as an attachment in your email.

The manual is 4,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Horizon Hobby AR7210BX - BeastX

Horizon Hobby AR7210BX - BeastX User Manual - English - 176 pages

Horizon Hobby AR7210BX - BeastX User Manual - German - 64 pages

Horizon Hobby AR7210BX - BeastX User Manual - German - 176 pages

Horizon Hobby AR7210BX - BeastX User Manual - French - 57 pages

Horizon Hobby AR7210BX - BeastX User Manual - French - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info