606950
49
Zoom out
Zoom in
Previous page
1/59
Next page
EN
49
Usage of SAFE
®
Technology
Once SAFE
®
technology was enabled by choosing one of the five SAFE
®
technology types
at Parameter Menu Point L, SAFE
®
technology can be activated and deactivated in flight
by using the switch on the transmitter whose channel was assigned as actuator for SAFE
®
technology in Receiver setup menu. When the Spektrum AR7210BX is ready for operation
check whether activation of SAFE
®
technology works as expected:
Similar to the tail gyro gain display you can determine the status of SAFE
®
technology by
watching the yellow Menu-LEDs. These light up each time after the initialization sequence
as well as when the amount of SAFE
®
technology gain is changed respectively when SAFE
®
technology is activated/deactivated. To distinguish the tail gyro gain display from SAFE
®
technology the Status-LED lights up in red color when the status of SAFE
®
technology is
displayed. When SAFE
®
technology is deactivated Menu-LED A starts to flash. If one of the
Menu-LEDs B through N lights up, SAFE
®
technology is active. The individual Menu-LEDs
signal the amount of SAFE
®
technology gain. The larger the deflection of the switch channel
for the SAFE
®
technology is, the farther the Menu-LED will go in the direction of point N
and the stronger the effect of SAFE
®
technology will be. In particular this determines how
fast and violent the helicopter will be rotated back to horizontal position. For the first flight it
is recommended to adjust the throw of the SAFE
®
technology channel just until Menu-LED
G lights up when SAFE
®
technology is activated. If using a small helicopter like 450 size or
below typically you can set the gain even higher (until Menu-LED I lights up).
-100%
100%
0%
Menu-LEDs
Switch channel for SAFE® technology
SAFE
®
Technology on
(Status-LED: red)
B C D E F G H I J K L M N
A
SAFE
®
Technology o
(Status-LED: red)
SAFE®Technology with Separate Switch Channel
SAFE
®
technology activation and strength can also be programmed to a separate switch on
7+ channel Spektrum transmitters, using any channel assignable to a 2-position switch,
AUX2 and higher. Travel and direction of the SAFE
®
technology channel determine whether
SAFE
®
technology is active or not and how strong it reacts. A deflection into one direction
will activate SAFE
®
technology. Typically Menu-Led N (maximum gain) will light up when
activating SAFE
®
technology for the first time, as the travel of the channel will be 100%. Adjust
the deflection of this channel, i.e. by reducing the servo travel in the transmitter, so that one
of the Menu-LEDs lights up next to point G (or point I when using a small helicopter) as
described previously.
When the switch channel is moved into the other direction Menu-LED A will light up and
flash. In this case SAFE
®
technology is deactivated. When SAFE
®
technology is deactivated,
i.e. the switch is placed in the other direction, the status LED remains momentarily Red, and
the Menu-LED flashes next to point A to confirm deactivation.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Horizon Hobby AR7210BX - BeastX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Horizon Hobby AR7210BX - BeastX in the language / languages: English as an attachment in your email.

The manual is 4,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Horizon Hobby AR7210BX - BeastX

Horizon Hobby AR7210BX - BeastX User Manual - English - 176 pages

Horizon Hobby AR7210BX - BeastX User Manual - German - 64 pages

Horizon Hobby AR7210BX - BeastX User Manual - German - 176 pages

Horizon Hobby AR7210BX - BeastX User Manual - French - 57 pages

Horizon Hobby AR7210BX - BeastX User Manual - French - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info