606950
45
Zoom out
Zoom in
Previous page
1/59
Next page
EN
45
Operating Principles of SAFE
®
Technology
When SAFE
®
technology is used in this manual, reference is made to leveling the model,
regardless of a particular operating mode (e.g. “Bail out rescue mode,” “3D - Mode” or “Flight
trainer mode”).
SAFE
®
technology can be enabled or disabled via Parameter Menu Point L by selecting one
of the operating modes as mentioned above. Only if SAFE
®
technology is enabled, i.e. one of
the five operating modes is selected, can SAFE
®
technology be activated with the transmitter.
The existing channel for the tail gyro gain can be used to switch SAFE
®
technology on and off
when a transmitter with only six channels is used. Alternatively a separate switch channel can
be assigned to control SAFE technology if the transmitter has more channels available.
L SAFE
®
Technology — Operation Mode
At Parameter Menu Point L you can choose between five different SAFE
®
technology
operation modes. This is done as usual by selection with the rudder stick. If one of the SAFE
®
technology operation modes is selected, the SAFE
®
technology function is active and it can
be activated/deactivated in operation by using the assigned transmitter channel for SAFE
®
technology (see Usage of SAFE
®
Technology). The “SAFE
®
technology disabled” option
specifies the SAFE
®
technology is completely disabled and actuating the SAFE
®
technology
channel has no effect (in terms of the SAFE
®
technology). The assignment to the colors of the
Status-LED is as follows:
Status-LED SAFE
®
Technology Operation Mode
OFF SAFE® technology disabled*
Purple Flashing Bail out rescue mode
Purple Solid Bail out rescue mode with collective pitch
Red Flashing 3D — Mode
Red Solid 3D — Mode with collective pitch
Blue Solid Flight trainer mode
*
Factory setting
First, enable SAFE
®
technology when all initial settings in Setup menu
and Receiver menu have been performed. Otherwise the servos may drive to the
mechanical full stop, start binding and may get damaged, e.g. when SAFE
®
technology gets
activated when leaving the menu and the system starts to try moving the heli.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Horizon Hobby AR7210BX - BeastX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Horizon Hobby AR7210BX - BeastX in the language / languages: English as an attachment in your email.

The manual is 4,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Horizon Hobby AR7210BX - BeastX

Horizon Hobby AR7210BX - BeastX User Manual - English - 176 pages

Horizon Hobby AR7210BX - BeastX User Manual - German - 64 pages

Horizon Hobby AR7210BX - BeastX User Manual - German - 176 pages

Horizon Hobby AR7210BX - BeastX User Manual - French - 57 pages

Horizon Hobby AR7210BX - BeastX User Manual - French - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info