606950
43
Zoom out
Zoom in
Previous page
1/59
Next page
EN
43
J RPM Governor — Initial Spool Up Rate
When activating the RPM Governor this will not apply full throttle immediately but will increase
the rotor head speed slowly until the desired preset head speed is reached. At Menu Point
J you can determine how quickly this soft start occurs when the RPM Governor is activated
initially. The speed is given in number of revolutions by how much the rotor speed is increased
per second. The higher the speed the faster your preset head speed will be reached. Please
note that the given rates only are indicative. Depending on the response of the speed controller
and the inertia of the rotor system it can actually take longer or shorter until the desired speed
is reached. Associated with this the speed also determines how gently the rotor will start to
turn. If the speed is too high, the rotor blades may fold in during startup because the system
enters throttle too abruptly. With nitro helicopters this also may cause the engine to quit
because the throttle is opened too fast and too far.
Status-LED Spool Up Rate
OFF User Defined
Purple Solid 50 RPM/s
Red Flashing 100 RPM/s
Red Solid 200 RPM/s*
Blue Flashing 300 RPM/s
Blue Solid 400 RPM/s
*
Factory setting
Select “user defined” to choose a custom value that can be edited by using the StudioX
software and the optional USB2SYS (SPMA3030 or BTXA76007) interface.
Press the button to save the configuration and to proceed to Menu Point K.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Horizon Hobby AR7210BX - BeastX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Horizon Hobby AR7210BX - BeastX in the language / languages: English as an attachment in your email.

The manual is 4,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Horizon Hobby AR7210BX - BeastX

Horizon Hobby AR7210BX - BeastX User Manual - English - 176 pages

Horizon Hobby AR7210BX - BeastX User Manual - German - 64 pages

Horizon Hobby AR7210BX - BeastX User Manual - German - 176 pages

Horizon Hobby AR7210BX - BeastX User Manual - French - 57 pages

Horizon Hobby AR7210BX - BeastX User Manual - French - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info