594435

Hoover SteamVac Manual

12
Zoom out
Zoom in
Previous page
1/63
Next page
CAUTION
! !
To reduce the risk of injury from moving parts,
unplug cleaner.
To prevent possible leaking, remove Clean Water
Solution Tank and Dirty Water Tank before positioning
bare floor attachment.
Refer to Fig. 2.4 to remove Clean Water Solution
Tank. Set tank aside (do not set tank on furniture).
Refer to Fig. 2.8 to remove Dirty Water Tank.
With handle in upright position, tilt cleaner back so
that handle rests on the floor.
3.3 With foam strip (A) (located under the netting) in
position as shown, place attachment on front of
nozzle (B).
Make sure arrow on end of attachment points in the
direction as shown.
3.4 Push attachment against nozzle while rotating
attachment downward until both ends snap into
place.
(Note: Some force may be required to rotate and
snap attachment into place.) Return carpet cleaner to
upright position. Lower handle and replace Dirty
Water Tank.
Raise handle to upright position and reposition Clean
Water Solution Tank.
CLEANING BARE FLOORS
How to attach bare floor attachment
(available on select models only)
R
O
T
A
T
E
O
N
B
A
R
E
F
L
O
O
R
3.3
R
O
T
A
T
E
O
N
B
A
R
E
F
L
O
O
R
A
B
R
O
T
A
T
E
O
N
B
A
R
E
F
L
O
O
R
3.4
Fill Clean Water Solution Tank with HOOVER
®
detergent (available at additional cost if not included
with your model) according to instruction on page 8.
Do not use any type of wax with your SteamVac
®
cleaner.
Dry hands and plug cleaner into a properly
grounded outlet.
Step on handle release pedal and lower handle to
operating position; turn cleaner ON.
To release detergent, press trigger. Slowly move
cleaner forward and backward over area to be
cleaned.
To pick up dirty solution, release trigger and slowly
move cleaner over area where solution has just been
dispersed. Use both forward and reverse strokes.
Remove attachment from nozzle and rinse in clean
water. Do not remove plastic screen or foam from
attachment.
IMPORTANT
Read Before you begin cleaning. Do not use the
SteamVac
®
cleaner on hardwood floors.
TO CLEAN BARE FLOORS
12
Actual model may vary from images shown.
CAUTION
! !
DO NOT USE THIS EXTRACTOR ON HARD
FLOORS UNLESS YOU HAVE THE PROPER
HARD FLOOR ATTACHMENT. USING THIS
MACHINE ON HARD FLOORS WITHOUT
PROPER ATTACHMENT MAY SCRATCH OR
DAMAGE YOUR FLOOR.
CAUTION
! !
DO NOT USE THIS EXTRACTOR ON HARD
FLOORS UNLESS YOU HAVE THE PROPER
HARD FLOOR ATTACHMENT. USING THIS
MACHINE ON HARD FLOORS WITHOUT
PROPER ATTACHMENT MAY SCRATCH OR
DAMAGE YOUR FLOOR.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoover SteamVac at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoover SteamVac in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info