817765

Hoover HAVG5BF4S2B Manual

9
Zoom out
Zoom in
Previous page
1/178
Next page
ADAPTING THE HOB TO DIFFERENT TYPE
OFGAS
B:1/2Seal
C:1/2 Female GasAdaptorConical-Cylindirical
1.Asillustrated,assemblepartsinsequence:
copperpipeorflexiblesteelpipe.
orCylindirical-Cylindirical
burnersupport(Figure7*)
•Unscrewtheinjectorandreplaceitwithone
When connecting the hob to the gas supply via
use offlexible hoses please ensure that the
maximum distance covered by the hose does
notexceed2metres.
A:1/2MaleAdaptorCylindirical
For some models a conic link is furnished to
outfit for the installation in the countries where
this type of link is obligatory; in picture 8 it is
pointed out how to recognize the different
types of links (CY = cylindrical, CO = conic). In
every case the cylindrical part of the link has to
beconnectedtothehob.
NEVER USE A FLAME. Also, make sure that the
flexible pipe cannot come into contact with a
movingpart of the cabinet (eg.adrawer)and that
itisnotsituatedwhere itcouldbe damaged.
IMPORTANT: carry out a final check for leaks on
thepipeconnectionsusingasoapysolution.
table)
2. Tighten the joints with the spanner, remembering
To prevent any potential damage to the hob
please carry out the installation following this
sequence(Figure6*):
Warning: If gas canbe smeltin the vicinityof this
appliance turn off the gas supply to the
appliance and call the engineer directly. Do not
searchforaleakwithanakedflame.
to twist the pipes into position.
3.AttachfittingCtomainsgassupplyusingrigid
•Removethe gridsandburners
Theflexibletubeshallbefittedinsuchawaythat
it cannot come into contact with a moveable
part of the housing unit (e.g. a drawer) and does
not pass through any space where it may
become crushed/ kinked or damaged in any
way.
To adapt the Hob for use with different types of
gas,carryout thefollowinginstructions:
suitableforthegastobeused(seegastype
•Insertonhexagonalspanner(7mm)intothe
Using a small «Terminal» type screwdriver the
regulatingscrewcanbeadjustedasinFigure 9*.
Turning the screw clockwise reduces the gas
flow, whilst turning it anticlockwise increases
the flow – Use this adjustment to obtain a flame
of approximately 3 to 4 mm in length and then
replacethecontrolknob.
When you have carried out the new gas
regulation,replace theold gas ratingplate on your
appliance with one (supplied with hob) suitable for
thetypeof gas forwhich it has been regulated.
After lighting the burners, turn the control knob
to the minimum setting and then remove the
knob (this can easily be removed by applying
gentlepressure).
REGULATINGTHEMINIMUMFLAME
When the gas supply available is LPG - the
screw to set the idle flame must be turned
(clockwise)tothe endstop.
*See“Technical information”sectionat theendof thismanual.
EN 9
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoover HAVG5BF4S2B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoover HAVG5BF4S2B in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 2.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info