817765
7
Zoom out
Zoom in
Previous page
1/178
Next page
Instructions for the installer
Metal objects in the drawer may reach high
temperatures due to air recirculation. It is
therefore recommended to use an intermediate
woodpanel.
The Hob unit is fitted by attaching the Fixing
Clamps supplied, using the holes at the base of
theunit.
Installing a domestic appliance can be a
complicated operation which if not carried
out correctly, can seriouslyaffect consumer
safety. It is for this reason that the task
should be undertaken by a professionally
qualifiedperson who will carry it out in
accordance with the technical regulations in
force. In the event that this advice isignored
and the installation is carried out by an
unqualified person, the manufacturer
declines all responsibility for any technical
failure of the product whether or not it
results in damage to goods or injury to
individuals.
Thehobmaybeinstalledinanyworktop which is
heat resistant to a temperature of 100°C, and
has a thickness of 25-45 mm. The dimensions
of the insert to be cut out of the worktop are in
showninFigure2*.
Important-ThediagraminFigure1*shows
howthesealantshouldbeapplied.
rear wall must be at least 70 mm for frontal
control hobs and 50 mmforlateralcontrolhobs.
The distance between the hob and any other
unitor appliance aboveit (e.g.An extractor hood)
mustbenolessthan 700 mm (Figure4*).
If the Hob is fitted next to a cabinet on either
side, the distance between the cut out and the
cabinet must be at least 170 mm for 60 cm
hobs and 250 mm for 75 cm hobs (see Figure
2*);whilethedistancebetweenthehobandthe
Whenthere isan accessiblespace betweenthe
built-in hob and the cavity below, a dividing wall
made of insulating material should be inserted
(woodorasimilarmaterial)(Figure3*).
When a 75 cm hob is fitted over a built in oven,
thelattermustbefancooled.
BUILDINGIN
When a 60 cm hob is fitted over a built in oven,
thelattermustbefancooled.
This appliance must be installed in accordance
with the regulations in force and only used in a
well ventilated space. Read the instructions
beforeinstallingorusingthisappliance.
If a hood can not be installed, an electric fan
should be fitted to an outside wall or window to
ensurethatthereisadequateventilation.
The electric fan should be able to carry out a
complete change of air in the kitchen 3-5 times
every hour. The installer should follow the
relevantnationalstandards.
SUITABLE LOCATION
A gas-powered cooking appliance produces
heat and humidity in the area in which it is
installed. For this reason you should ensure
good ventilation either by keeping all natural air
passages open or by installing an extractor
hood with an exhaust flue. Intensive and
prolonged use of the appliance may require
extra ventilation, such as the opening of a
window or an increase in speed of the electric
fan,ifyouhaveone.
*See“Technical information”sectionat theendof thismanual.
EN 7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoover HAVG5BF4S2B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoover HAVG5BF4S2B in the language / languages: English, German, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 2.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info