705632
16
Zoom out
Zoom in
Previous page
1/28
Next page
!
16
! It is possible to modify the spin speed at
any time, without shifting the machine to
PAUSE.
! This button allows you to pre-programme
the wash cycle to delay the start of the
cycle for up to 24 hours.
! To delay the start use the following
procedure:
- Set the required programme.
- Press the delay start button once to
activate it (0:30h appears on the display)
and then press it again to set a
1 hour delay (1:00h appears on the
display). The pre-set delay increases by
30
minutes each time the button is
pressed, until h24 appears on the display,
at which point pressing the button again will
reset the delay start to zero.
- Confirm by pressing the START/PAUSE
button (the light on the display starts to
flash). The countdown will begin and
when it has finished the programme will
start automatically.
! It is possible to cancel the delay start by
pressing the ON/OFF button (for at least
3 seconds).
! This button allows a specific treatment
to follow certain wash cycles (please
refer to the program table).
! The steam function works by relaxing
creases in wet garments and as a
result reduces the time needed to iron
these items.
! The fibres are regenerated and
refreshed by removing bad smells.
! Every program provides a dedicated
steam treatment in order to ensure the
max imum cleaning efficiency according
to the items fabric type and colour.
This button allows you to choose
between three different options:
- PREWASHING
! This option allows you to make a prewash
and it is particularly useful for heavily
soiled loads (can be used only on
some programmes as shown in the
table of programmes).
To prevent damage to the fabrics, it is
not possible to increase the speed
over the maximum one set for each
programme.
An over dosing of detergent can
cause excessive foaming. If the
appliance detects the presence of
excessive foam, it may exclude the
spinning phase or extend the duration
of the programme and increase water
consumption.
The machine is fitted with a special
electronic device, which prevents the
spin cycle should the load be
unbalanced. This reduces the vibration,
improves noise reduction and prolongs
the life of the washing machine.
DELAY START button
STEAM button
This option must be selected
before pressing the START/PAUSE
button.
OPTIONS button
If the detergent Autodose system is
off, to make a prewash, you need to
pour the powder detergent directly
into the drum. In this case, it is
suggested to use only the 20% of the
quantity reported on the detergent
package.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoover AWMPD413LH7-80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoover AWMPD413LH7-80 in the language / languages: English as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info