705632
15
Zoom out
Zoom in
Previous page
1/28
Next page
!
EN
15
! After turning the appliance on, you will
be able to select the desired programme
by pressing the relevant icon that will
light up. The display will show the
description and the relevant parameters.
! To start the selected cycle with the preset
parameters, press START/PAUSE. When
the programme is running, the display will
show the time to elapse.
! Moreover, If you want to modify the
chosen program, press the desired
options buttons, modify the default
parameters and then press
START/PAUSE button to start the cycle.
! Press to start the set cycle.
CYCLE DURATION
! When a programme is selected the
display automatically shows the cycle
duration, which can vary, depending on
the options selected.
! Once the programme has started you will
be kept informed constantly of the time
remaining to the end of the wash.
! The appliance calculates the time to the
end of the selected programme based
upon a standard loading, during the cycle,
the appliance corrects the time to that
applicable to the size and composition of
the load.
ADD OR REMOVE ITEMS AFTER THE
PROGRAMME HAS STARTED (PAUSE)
! Press START/PAUSE (the display shows
PAUSE).
! After adding or removing items, close the
porthole and press START/PAUSE (the
programme will resume from when it was
interrupted).
CANCELLING THE SET PROGRAMME
! To cancel the programme, press the
ON/OFF button for about 2 seconds until
the display switches off.
! By this option you can change
thetemperature of the washing cycles.
! By this option you can reduce the
maximum spin speed for the set
programme, until it is completely
excluded.
! If the label does not show any
instructions, you can spin to the
maximum speed set for the programme.
Touch Control (programmes
selection)
Only the options compatible with the
set programme can be selected.
When the appliance is turned on again,
the last programme will be shown,
memorising the previously set values.
START/PAUSE button
Close the porthole BEFORE pressing
the START/PAUSE button.
After starting the washing machine
you need to wait a few seconds before
the appliance starts the programme.
Ensure that the water level is below
the porthole before opening it, to
prevent any flooding.
TEMPERATURE SELECTION button
To prevent damage to the fabrics, it is
not possible to increase the
temperature above the maximum
value set for each programme.
SPIN SELECTION button
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoover AWMPD413LH7-80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoover AWMPD413LH7-80 in the language / languages: English as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info