Manual Honeywell ST9100C (page 9 of 18) (English)

613680

Zoom out

Zoom in

1/18

PROGRAMMING YOUR ST9100C

h. When the required day is indicated, press the green button to conﬁrm, and

the message ‘MON COPIED’ will be displayed for a moment. The day into which

Mondays programme has been copied is now available to have its programme

edited.

Note: Once a day’s programme has been conﬁrmed in this way, it now becomes the

day whose programme is copied if the COPY DAY button is pressed again.

Programming a Different Day:

i. Press the NEXT DAY button to select the next day, which is displayed along the

top of the screen. The programme for that day can then be adjusted by following

steps b – e above. Programmes for the remaining days can be set in the same

way, using the NEXT DAY button to move to the next day.

Exiting Programming Mode:

To exit programming mode, move the slider to the RUN position. This can be done at

any time during the programming process, and any changes made and conﬁrmed

with the button will have been saved.

Note: If the unit is left in programming mode for more than 10 minutes without the

slider being moved or any buttons pressed, the message ‘MOVE SLIDER’ will be

displayed. Press a button to ﬁnish programming, or move the slider to the RUN

position.

Disabling / Enabling Time Periods

To disable any of the time periods ON 1 to OFF 1, ON 2 to OFF 2, or ON 3 to OFF 3,

simply set the ON time and its paired OFF time to the same time, and the programme

will just ignore them.

To re-enable the time period, simply set the two ON and OFF times to be different.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell ST9100C in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell ST9100C Manual

Product: