613680

Honeywell ST9100C Manual

8
Zoom out
Zoom in
Previous page
1/18
Next page
8
Note: When pressing the button the next ON or OFF marker may start to flash.
This indicates you have tried to set a time equal to one of the next programme times
already in the memory. Similarly, when pressing the button the previous ON or
OFF marker may start to flash. This indicates you have tried to set a time equal to
one of the previous programme times. If this happens the ST9100C simply moves
both times together as long as you continue to press the or buttons. Follow
the procedure in ‘Reviewing the Programme Times’ (page 7) to check and adjust
these times as necessary.
c. ‘SET OFF-TIME 1’ will be displayed and the first OFF 1 time will now be flashing.
If you do not wish to change the time, press the green button and move to the
next step. Otherwise, use the or buttons to change the time. Press the
green button to confirm the time is correct and move to the next step. ‘SAVED’
will be displayed for a moment to confirm that any change has been saved to
memory.
d. The remaining ON and OFF times (ON 2, OFF 2, ON 3, OFF 3) can be set by
using the or buttons to change the time, and the green button to
confirm the time is correct and move to the next step. If you do not wish to
change the time, just press the green button to move directly to the next
ON/OFF time without making any changes.
e. After setting or reviewing the last off time, OFF 3, the message ‘COMPLETE’ will
be displayed to indicate the times for Monday have been set.
You now have a choice of how to set the programme for the next day:
Copying one day’s Programme to another day (example Monday to Tuesday):
f. Whilst the day is showing Monday, Press the COPY DAY button. The message
‘COPY MON TO TUESDAY OK?’ will be displayed and the letters TUE will flash
to indicate the programme for Monday can be copied to Tuesday.
g. To select a different day to copy to, press the NEXT DAY button to cycle through
the days. With each press of the NEXT DAY button the message will change to
indicate the new day you are copying to.
PROGRAMMING YOUR ST9100C
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell ST9100C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell ST9100C in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info