Manual Honeywell R200S-N1 (page 11 of 96) (English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish)

794976

Zoom out

Zoom in

1/96

- 11 -

Note: if you press the test/silence button on one of the interconnected alarm other than the

originating alarm, it will NOT be silenced, the remaining interconnected alarms will continue

emitting sound until the primary alarm is stopped.

11. Maintenance

This smoke alarm is equipped with a self-testing mechanism. Additionally, we recommend

testing the smoke alarm manually at least once per months by pressing the test/silence

button. If the smoke alarm functions correctly, it will generate a loud beep. Due to the

loudness of the alarm, make sure that you always stand at arm’s length distance from the

unit when testing. If the smoke alarm does not generate the acoustic signal, it must be

replaced immediately. Clean the smoke alarm at least once per month to remove dirt, dust

or debris. Use a vacuum cleaner with a soft brush and vacuum all sides of the alarm. Do not

remove the top cover to clean it inside. The alarm does not contain any serviceable parts

inside - do not attempt to open or repair it. If the alarm shows any signs of damage, it must

be replaced.

12. Warnings

This Smoke alarm is for indoor use only. To prevent injury, this smoke alarm must be

securely attached to a ceiling/wall in accordance with the installation instructions. Do not

paint or cover the Smoke alarm. This Smoke alarm should not be exposed to excessive heat

such as sunshine, fire, etc. Do not test with flame – this can set fire to the Smoke alarm and

damage the house. Do not test with smoke, as the results can be misleading, unless special

equipment is used. Prolonged exposure to low or high temperatures, or high humidity, may

reduce battery life. Prolonged periods of alarm will reduce battery life. The latest design,

materials and manufacturing techniques have been used in the construction of this Smoke

alarm to minimize the risk of its contamination by dust, insects, etc. However, it is impossible

to completely eliminate such risk, so ensure that the Smoke alarm is clean, and dust does

not build up. Any insects or cobwebs in the vicinity of the Smoke alarm should be promptly

removed. In certain circumstances, even with regular cleaning, contamination can build up in

the sensor, triggering the alarm. If this happens, the Smoke alarm must be replaced.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell R200S-N1 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 2.33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell R200S-N1 Manual

Product: