794976

Honeywell R200S-N1 Manual

10
Zoom out
Zoom in
Previous page
1/96
Next page
- 10 -
b) Choose one interconnected alarm as Master. Press 3 times its test/silence button. The
LED light will turn on.
c) Choose another interconnected alarm as Slave. Press 3 times its test/silence button. The
LED light will turn on.
d) Wait a few seconds until the Master device beeps and Slave device turns off its LED,
indicating successful network pairing.
e) Repeat step c) for connecting more interconnected alarms.
NOTE: always use the same Master alarm for connecting additional Resideo interconnected
smoke, heat or carbon monoxide (CO) alarms, now and in future. Write down which
interconnected alarm in your home is the Master. And you can only enable pairing when the
mounting plate has installed.
After the master alarm enters interconnect mode for pairing, it will automatically exit
connection mode within 40 seconds, and this 40-second period will be extended by another
40 seconds after each successful pairing. After all interconnected alarms are connected, the
master can also manually exit by pressing the test/silence button three times if the master
device has not yet exited the pairing mode.
Test your interconnection
Hold down the test/silence button. The initial interconnected alarm will beep continuously
with the LED flashes at the same rate. Other interconnected alarms in the network will
receive the signal after few seconds, and they will beep continuously without LED flashes for
at most two test alarm period.
Reset Connection
a) Remove the product out of the back plate, and you will hear a beep in few seconds.
b) 3x Press the test/silence button and press once again when LED light turn on.
c) While the LED light turn off with a beep, the connection has been reset successfully.
How to silence interconnected alarms
When an interconnected alarm has been activated, find the originating interconnected
alarm, which will be the one both emitting the audio signal and red LED message. Mute this
interconnected alarm by pressing its test/silence button, and within 40 seconds the
remaining interconnected alarms will go back to standby.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell R200S-N1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell R200S-N1 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 2.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info