32549
5
Zoom out
Zoom in
Previous page
1/20
Next page
5 69-0733—3
which programmable thermostats will work with
your system, call Honeywell Customer Assis-
tance at 1-800-468-1502.
Three thermostat wires?
If you have three wires for heating only and can
operate the fan using the fan ON switch, this
thermostat will work with your system. However,
some hot water (zoned) heating systems have
three thermostat wires. The thermostat will not
work without installing an isolating relay on these
systems. For details, call Honeywell Customer
Assistance at 1-800-468-1502.
not allow them to touch, or you can damage your
transformer. Disconnect the wires and wrap
them separately using electrical tape;
do not
wrap them together
. Place the wires where they
will not interfere with the operation of the new
thermostat. Record the colors and terminal des-
ignation labels of the remaining wires.
Six or more wires?
If there are six or more wires (excluding clock
wires attached to terminals), you most likely
have a variation of a heat pump or multistage
system. The thermostat is
not
compatible with
such systems so return the product to the place
of purchase. If you would like information about
6 69-0733—3
STEP 3 Before You Program
M2589
INSTALL 3 AA ALKALINE BATTERIES AS SHOWN, 
POSITIVE (+) TERMINALS TOWARD RIGHT.
BACK OF THERMOSTAT
Install the Batteries
IMPORTANT:
Three AA alkaline batteries are
included with the thermostat. Batteries must
be installed for programming and operation of
the thermostat and heating/cooling system.
Install the batteries in back of the thermostat
as shown, making sure positive (+) terminals all
face toward the right.
As the batteries are running low, a REPL BAT
indicator will flash for 1 to 2 months before bat-
teries run out completely. Replace the batteries
as soon as possible after the indicator starts
flashing.
If you insert new batteries within 20 to 30 sec-
onds of removing the old ones, you will not have
to reprogram the thermostat. However, if the
display is blank, the batteries are dead or
incorrectly installed. In this case, you will
have to reprogram. See pages 13 through 15
to reprogram. If you do not reprogram, the
factory-prepro-
grammed
settings will be
in effect, as
shown in
chart on
pages 11
and 12.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell MAGICSTAT_34 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell MAGICSTAT_34 in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell MAGICSTAT_34

Honeywell MAGICSTAT_34 User Manual - Spanish - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info