32549
19
Zoom out
Zoom in
Previous page
1/20
Next page
Adaptive Intelligent
Recovery™ ....................... 7,8
Batteries, installation .............. 6
Batteries, replacement ........ 6,7
Blinking display ....................... 6
Canceling programs ............. 15
Change temperature............. 15
Checking current setting....... 15
Clock display ........................ 19
Conventional Recovery ....... 7,8
Cooling
temperatures ........ 9,11,12,14
Current setting ...................... 15
Customer Assistance............ 35
Day........................................ 13
DAYTIME .................... 13,14,15
Energy-saving
temperature ......................... 9
EVENING.................... 13,14,15
Fan operation switch ............ 20
33 69-0733—3
Index
Fan switch............................. 29
Flashing display ...................... 6
Heating
temperatures ........ 9,11,12,13
Hold temperature .................. 15
MORNING ....................... 13,14
NIGHT ......................... 13,14,15
Operation .............................. 15
Period keys ............................. 9
Personal programming
chart .............................. 11,12
Preprogrammed
schedule ............... 9,10,11,12
Programming steps ......... 13,14
Replacing batteries.............. 6,7
Saturday
program ......... 10,11,12,13,14
Set cooling temperatures ..... 14
Set present day .................... 13
Set present time ................... 13
Set fan switch ....................... 28
Set cooling temperatures ..... 14
Set heating temperatures ..... 13
Setting limits .................... 11,12
Sunday
program ......... 10,11,12,13,14
System switch....................... 29
Switch,fan ............................. 28
Switch, system...................... 29
Table of Contents ................... 1
Temporary program
changes ........................... 15
Time ...................................... 13
Time period .............. 9,10,11,12
Troubleshooting ..... 30,31,32,33
Warranty ............................... 36
Weekday
program ........... 9,10,11,13,14
34 69-0733—3
HEAT ON is displayed, but Allow time for the furnace to heat up and the fan to come on
no heat is coming from before checking for heat at the register. Note that on most gas
the registers. and oil systems, the fan is not controlled by the thermostat, but
by another control, which may account for the delay.
The system cycle length Readjust according to instructions on pages 18 and 19.
is too short or too long.
The thermostat's current Check that the wiring hole in the wall behind the wallplate has
setting does not match the been plugged with insulation to prevent drafts that might
display temperature to adversely affect thermostat operation.
within
± 1°. Be aware that it is normal for the current setting and display
temperature to differ occasionally.
Incorrect room temperature Make sure the hole behind the thermostat is plugged with
showing on thermostat insulation to help prevent drafts from adversely affecting the
display. thermostat operation.
The thermosat is factory-calibrated and cannot be adjusted.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell MAGICSTAT_34 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell MAGICSTAT_34 in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell MAGICSTAT_34

Honeywell MAGICSTAT_34 User Manual - Spanish - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info