527104

Honeywell HZ435 Manual

6
Zoom out
Zoom in
Previous page
1/29
Next page
6
We recommend that the 360º Ceramic Surround Heater be cleaned at least once a month and before
off-season storage.
• Turn the heater OFF (
) or ( ) and unplug it. Allow it to cool.
• Use a dry cloth only to clean the external surfaces of the heater. DO NOT USE WATER, WAXES,
POLISHES OR ANY CHEMICAL SOLUTION.
• Before storing, clean the 360º Ceramic Surround Heater using the above-mentioned steps. Wrap the
cord around the unit. Place in its original box and store it in a cool, dry place.
• This heater does not disassemble.
CLEANING AND STORAGE
SAFETY FEATURES
The 360º Ceramic Surround Heater is equipped with several devices and features for added protection:
• 360° SafetyTIP™ is an all-around tip-over switch that disables the heater if it is accidentally tipped
in any direction.
• A high temperature safety control prevents overheating.
• This heater is also equipped with a thermal cut-off fuse that will permanently shut down the heater
should it operate at a higher than normal temperature.
• This heater was created using a high quality safety plastic.
• To set the thermostat, press the Temp Set button until Desired Temperature is reached. Note: the Desired
Temperature will flash three times and then Current Temperature in the room will display as a steady red.
• To constantly run the heater without a thermostat setting, press the Temp Set button until HI is
displayed in Temperature Display. In this mode, make sure to manually shut the heater OFF when
done using this appliance.
• To set the Timer, press the (
) button to select 1, 2, 4, or 8 hour setting. The heater will run for
that chosen period in the selected mode, counting down the remaining time in the display bar and
automatically shut off after the desired time has passed.
OPERATION (CONTINUED)
Remote Control
The Digital 360° Surround Heater can be completely controlled with the remote. Two AAA 1.5V batteries are
required (included). To install batteries:
• Remove the cover located on the back of the remote control.
• Insert two AAA 1.5V batteries, positioning them correctly (see instructions in the batteries compartment).
• Replace the cover.
Remote Control Operation
• Locate remote control packed in the top insert.
• Press (
) to turn heater on or off.
• Press (
) to choose LO (900W) or HI (1500W) Heat Level Setting.
• Press (
) to choose 1, 2, 4 or 8 hour setting.
• Press SET to choose a thermostat setting. Desired Temperature
will flash three times and then Current Temperature in the room
will display as a steady red.
• Replace remote control in the holder on the side of the heater
when not in use.
Model HZ-440 Remote
Power
Button
Heat
Level
Setting
Temperature
Set Button
Timer
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HZ435 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HZ435 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 7,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info