527104

Honeywell HZ435 Manual

5
Zoom out
Zoom in
Previous page
1/29
Next page
5
OPERATION (CONTINUED)
To set the heater, the digital control is equipped with two (2) modes:
Constant Heat - there are two (2) heat settings
1. For Constant Low, press ( ); this setting uses 900 watts of power
2. For Constant High, press (
); this setting uses 1500 watts of power
NOTE: Because the Low (
) setting does not require as much electricity to operate, it is more energy
efficient and may be a better option if you are concerned about saving energy.
EnergySmart
™
Mode -
A smart thermostat that helps you save energy. Press SET to choose four (4) comfort settings of 65° (18°),
70° (21°), 75° (24°), 80° (27°). This is your desired room temperature. The EnergySmart™ thermostat
will automatically select the appropriate power level to best accommodate your Desired Temperature.
As the air temperature (Current Temp) in the room approaches the Desired Temperature, the heater will
automatically lower the power consumption to provide consistent warmth without wasting energy.
The Current Temp Indicator will display the current room temperature.
NOTE: In the EnergySmart™ mode, the Energy Usage Indicator will display what power consumption the
heater has automatically selected to efficiently meet your Desired Temperature.
• To override the EnergySmart™ function, turn the heater OFF (
) or press SET to choose a
Constant Heat mode. The Energy Usage guide will indicate STAND BY when the heater has reached
the Desired Room Temperature. At this point, the heater is most efficient and is drawing only a few
watts of energy while in STAND BY mode.
• To set the Timer, press the (
) button to select 1, 2, 4, or 8 hour setting. The heater will run for
that chosen period in the selected mode, counting down the remaining time in the display bar and
automatically shut off after the desired time has passed.
Model HZ-440 Series - Digital 360º Surround Heater with Remote Operation
Turn heater on by pressing Power Button on ( )
and the heater will start at the HI Heat Level
Setting (
). The Desired Temperature will flash
three times at a default of 75°F and the Current
Temperature in the room will then display in steady
red. Note: if the Current Temperature is higher
than 75°, the heater will remain off until the room
temperature falls below this setting or until the
Desired Temperature is changed.
• To set the Heat Level, press (
):
1. For Low, (
); this setting uses
900 watts of power
2. For High, (
); this setting uses
1500 watts of power
Note: Because the Low (
) setting does
not require as much electricity to operate,
it is more energy efficient and may be a
better option if you are concerned about
saving energy.
Model HZ-440
Power Light
Power Button
Heat Level
Setting
Temperature
Set Button
Current Temperature/
Desired Temperature
Display
Timer
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HZ435 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HZ435 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 7,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info