724044

Honeywell HZ-789 series Manual

4
Zoom out
Zoom in
Previous page
1/18
Next page
4
HZ-789 OPERATION
NOTE: NEVER LEAVE AN OPERATING UNIT UNATTENDED.
With the Power Button (
) in the OFF position, plug the heater into a 120V outlet.
DO NOT FORCE THE THREE PRONG SUPPLY CORD INTO THE OUTLET; it will only t
one way.
Turn the heater on by pressing Power Button (
) button, (Fig. 4). The heater will
default to the Constant HI mode and the Current Temp Indicator will display the
current room temperature.
As the heater warms up, the oil in the metal columns may naturally expand and
make a slight ticking sound. This is normal and will stop once the oil has reached
the optimal temperature.
The Energy Usage Indicator will display the power consumption used by the heater.
• If HI, the heater is drawing 1500 watts to quickly warm the room
• If LO, the heater is drawing 900 watts to slowly warm the room or maintain the
temperature.
• If STAND BY, the heater is drawing no power as the room has reached the Desired
Temperature. At this point, the heater is most ecient and is drawing only a few
watts of energy while in STAND BY mode.
To set the heater, (Fig. 5) the digital control is equipped with two (2) modes:
Constant Heat Mode - there are two (2) heat settings
1 For Constant Low, press SET to LO; this setting uses 900 watts of power
2 For Constant High, press SET to HI; this setting uses 1500 watts of power
NOTE: Because the LO setting does not require as much electricity to operate,
it is more energy ecient and may be a better option if you are concerned about
saving energy.
EnergySmart® Mode - A smart thermostat that helps you save energy. Press SET to
choose from four (4) comfort settings of 65°F (18°C), 70°F (21°C), 75°F (24°C), 80°F
(27°C). This is your desired room temperature. The EnergySmart® thermostat will
automatically select the appropriate power level to best accommodate your Desired
Temperature. As the air temperature (Current Temp) in the room approaches the
Desired Temperature, the heater will automatically lower the power consumption
to provide consistent warmth without wasting energy.
The Current Temp Indicator will display the current room temperature.
NOTE: In the EnergySmart® mode, the Energy Usage Indicator will display what
power consumption the heater has automatically selected to eciently meet your
Desired Temperature.
• To override the EnergySmart® function, turn the heater OFF (
) or press SET to
choose a Constant Heat mode.
• To set the Timer, (Fig.6) press the (
) button to select 2, 4, 6, 8, 10 or 12 hour
setting. The heater will run for that chosen period in the selected mode and
automatically shut o after the desired time has passed. Timer will count down
to display the remaining time.
Heat Setting
Control
Fig. 5
Fig. 6
Timer
Current
Temp
Indicator
Energy Usage
Indicator
Fig. 4
Power
Button
Constant
Heat
Modes
EnergySmart®
Modes
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HZ-789 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HZ-789 series in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info