660632
159
Zoom out
Zoom in
Previous page
1/180
Next page
Troubleshooting | 159
800-21090V2 - A - 03/2016
Problem: The NVR cannot control PTZ functions.
Check that the PTZ camera is connected correctly to the network.
Make sure that the NVR is configured correctly for PTZ operation. The protocol and
address settings of the NVR must match the protocol and address settings of the PTZ
camera. See Adding a Remote Device (Camera) on page 75 for the camera settings. See
Configuring TCP/IP and Port Settings on page 85 for NVR settings.
Problem: Motion detection does not work.
Increase the motion detection sensitivity. It may be set too low.
To set the motion detection sensitivity, see Configuring Motion Detection Settings on page
101.
Make sure that the motion detection schedule is configured correctly.
To setup up the Motion detection schedule, see To set up motion detection periods on
page 103.
Make sure that the motion detection zone setup is configured correctly.
To set up motion detection zone, see Configuring Motion Detection Settings on page 101.
Problem: The network connection is unstable.
Check that there is no IP address or MAC address conflict.
Problem: There is a USB backup error.
Check that the USB storage device has sufficient space available.
Problem: Alarm signal cannot be disarmed.
Make sure that the alarm settings are correctly configured.
Check the alarm cable connections.
Make sure that the NVR is running the latest firmware.
Problem: Alarm function is null.
Make sure that the alarm settings are correctly configured.
Check the alarm cable connections.
Check that you have not connected two loops to one alarm device.
159


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HEN04102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HEN04102 in the language / languages: English as an attachment in your email.

The manual is 14,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell HEN04102

Honeywell HEN04102 User Manual - English - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info