Manual Honeywell HCF 82 (page 7 of 32) (English, German, Dutch, French, Italian, Spanish)

585432

Zoom out

Zoom in

1/32

Overview

Contents

1. Overview ............................................................... 7

1.1. Application............................................................. 7

1.2. Differences HCW 82/HCF 82 ................................ 7

1.3. Scope of delivery................................................... 7

2. Commissioning...................................................... 7

2.1. Binding .................................................................. 8

2.1.1. Assignment to underfloor heating controller .......... 8

2.1.2. Assignment to evotouch ........................................ 8

2.1.3. Failed binding........................................................ 8

2.2. Installation ............................................................. 8

3. Particular features of HCW 82............................... 9

3.1. Operation .............................................................. 9

3.2. Limiting the adjustment range ............................... 9

3.3. Operation with an external power source.............. 9

3.4. Installing the window contact............................... 10

4. Changing batteries .............................................. 10

5. Checking radio transmission ............................... 10

6. Help with problems.............................................. 10

7. Technical data ..................................................... 10

8. WEEE directive 2002/96/ EC - Waste Electrical

and Electronic Equipment directive ..................... 10

1. Overview

The HCW 82/HCF 82 room devices are used for intelligent

room temperature control. The room temperature sensor

HCF 82 measures the room temperature and sends the

measured values to other devices.

The HCW 82 measures the room temperature and

additionally allows the room setpoint temperature to be

adjusted.

1.1. Application

The room devices transfer the data with 868.3 MHz. The

data can be received by other devices such as the

underfloor heating controller HCE 80/HCC 80/HCE 80R/

HCC 80R or the evotouch.

Thus a large spectrum of applications can be covered.

1.2. Differences HCW 82/HCF 82

The HCW 82 has the following functions in addition to those

of the HCF 82:

• Connection possibility for an external power supply unit

(see "Operation with an external power source", Page 9).

• Connection possibility for a window contact

(see "Installing the window contact", Page 10).

• Adjustment dial at which you can change the room

temperature setpoint directly.

The adjustment range amounts to ± 12 °C, starting from

the basic value of 20 °C (in position 0).

1.3. Scope of delivery

• 1 HCW 82/HCF 82

• 2 AA batteries

2. Commissioning

WARNING

Insufficient data transfer!

Interference of the radio receiver in the

device through metallic objects or

further radio devices.

► Ensure there is sufficient distance to

metallic objects.

► Mount the device with a distance of at

least 1 m to radio devices such as

radio headphones, cordless phones

according to the DECT standard, etc.

► Select another installation site if the

radio interference cannot be rectified.

Fig. 1: Removing the housing cover

► Remove the housing cover of the room temperature

sensor (see Fig. 1).

Fig. 2: Battery polarity and Bind button

► Insert the supplied AA batteries with the correct battery

polarity (see Fig. 2).

The batteries have to be replaced when the red LED at the

HCW 82/HCF 82 flashes (see "Changing batteries",

Page 10).

The setpoint adjuster HCW 82 can also be

operated with an external power source instead

of with batteries. Further information can be

found in section "Operation with an external

power source", Page 9.

► Place the room temperature sensor at the installation site,

but do not install it yet.

► Allocate the corresponding temperature zone to the

HCW 82/HCF 82 (see "Binding", Page 8).

Red LED

Bind button

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HCF 82 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell HCF 82 Manual

Product: