613651
26
Zoom out
Zoom in
Previous page
1/90
Next page
Help with problems22
Changing the fuse
Only use ceramic fuses of the type
230VAC; 2.5A; fast; 5x20 mm.
!
1
Deenergize the device.
2
Open the housing (see "Opening
the housing" on Page 10).
3
Remove the holder with the fuse (Steps 1 to 3).
14
Replace the old fuse by a new one.
5
Insert the fuse again.
6
Close the housing (see "Closing the
housing" on Page 13).
Restoring the factory settings at the
underfloor heating controller
When the underoor heating controller
is reset to the factory settings, the cur-
rent conguration (assignment) is deleted.
The underoor heating controller retains
its conguration after a power failure.
!
1
Keep the Mode and buttons pressed
simultaneously for at least 10 seconds.
After 4seconds the controller changes over
to test mode. Continue to keep the buttons
pressed until the
LED flashes orange.
The factory settings have been reset at
the underfloor heating controller.
Fault displays
If the LED lights up, a fault is present
in at least one temperature zone.
The colours of the zone LEDs 1...8 provide information
on the type of fault in the respective temperature zone:
Status Meaning
Off No fault
Flashing red No connection to the room temperature
sensor/setpoint adjuster
Flashing
orange
No connection to the setpoint
adjuster and evohome controller
or CM927 operating device
Flashing green
No connection to the evohome controller
or the CM927 operating device
The fault display extinguishes as soon
as the fault has been eliminated.
!
Help with problems
1
2
3
4
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HCE80-R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HCE80-R in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 29,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell HCE80-R

Honeywell HCE80-R User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info