613651
25
Zoom out
Zoom in
Previous page
1/90
Next page
HCE80(R) / HCC80(R) Mounting and operation 21
Checking the configuration
1
Press the installation button .
The
LED flashes orange.
The colours of LEDs 1...8 indicate the
configuration of the temperature zones.
LEDs 1...8 Meaning
Off No device installed
Red Room setpoint generator/
sensor is installed
Orange Time program, setpoint adjuster and
room temperature sensor are installed
Green Time program (room setpoint
temperature), e.g. evohome controller
Only if cooling was enabled
2
Press the installation button again.
The colours of LEDs 1...8 indicate
the assignment of the time programs
to the temperature zones.
LEDs 1...8 Meaning
Red Time program for heating assigned
Orange Time program for heating/
cooling assigned
Green Time program for cooling assigned
Test the radio communication
Sending test signals
The underoor heating controller can
send a test signal to all the allocated radio
receivers in order to test the signal strength.
!
1
Keep the Mode and buttons pressed
simultaneously for at least 4 seconds.
The
LED flashes green.
The underfloor heating controller sends
a test signal every 5seconds to the
allocated radio receivers. The zone
LEDs light up briefly during sending.
• You can exit the test mode by pressing any button.
• After 4 minutes the device changes
automatically to normal mode.
Receiving test signals
For information on sending a test
signal to the underoor heating
controller read the instructions of the
corresponding device (radio test).
!
1
Send a test signal to the underfloor heating controller.
If a test signal is received, the
LED flashes green.
The zone LED of the corresponding zone
indicates the strength of the received signal
by flashing (1 = sufficient - 5 = strong).
Checking the installation
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HCE80-R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HCE80-R in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 29,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell HCE80-R

Honeywell HCE80-R User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info