613651
22
Zoom out
Zoom in
Previous page
1/90
Next page
Connecting devices (binding)18
Binding the room thermostat DTS92 with
the underfloor heating controller
Setting the underfloor heating
controller to the binding mode
1
Keep the zoning plan at hand.
2
Press and hold the installation
button on the underfloor heating
controller for 2 seconds.
The
LED lights up. The LED
of zone 1 flashes green.
The underfloor heating controller waits
for the room thermostat signal.
In order to assign the room
thermostat to a different zone,
press the installation button
repeatedly until the LED of the
desired zone ashes green.
!
Setting the DTS92 to the binding mode
1
Keep the button pressed 2 seconds
long to set the room thermostat to standby.
2
Keep the
and
buttons pressed
simultaneously for 3 seconds.
INst should be displayed.
3
Press the
button.
COnt should be displayed.
4
Press the
button thrice.
CLr should be displayed.
5
Press the button once to delete
existing connecting data.
6
Press the
button.
COnt should be displayed.
7
Press the button once to
send the connecting signal.
The room setpoint temperature and
the measured room temperature are
assigned to the selected zone.
The LED of the selected zone at
the underfloor heating controller
lights continuously orange.
Binding
1
Press the installation button at
the underfloor heating controller
twice (skip red flashing LED).
The green LED of the next
zone flashes green.
Establishing a binding to further zones
1
Press the installation button at the
underfloor heating controller until the
LED of the desired zone flashes green.
Resetting the DTS92 to normal mode
1
Keep the button pressed until the
symbol is displayed in the bottom
right-hand corner of the display.
2
Again keep the button pressed until
the
symbol disappears in the bottom
right-hand corner of the display.
Binding the underfloor heating controller without time program
continued
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HCE80-R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HCE80-R in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 29,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell HCE80-R

Honeywell HCE80-R User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info