613651
20
Zoom out
Zoom in
Previous page
1/90
Next page
Connecting devices (binding)16
CM927
DTS92A(E) HCF82HCW82
Option
Each zone can be controlled with the same time
program with the CM927 operating device.
For information on installing the device please
read the CM927 installation instructions.
Activating the integrated room
temperature sensor at the CM927
The CM927 operating device has an integrated
room temperature sensor. The function
of the temperature sensor is specified by
Parameter 8:Su in the installation mode:
1
Set the slide switch to the "OFF" position.
2
Press the and <, > buttons
simultaneously.
1:CL
of the first parameter
level is displayed.
3
Press the > button to change to
the second parameter level.
1:Ot
of the second parameter
level is displayed.
14
Press the + button until 8:Su is displayed.
5
If applicable, use the
and
buttons to select the setting "2" and
confirm with the "OK" button.
The integrated room temperature
sensor is now used to measure and
control the room temperature.
Setting the CM927 to the binding mode
1
Set the slide switch to the "OFF" position.
2
Keep the
and
and < buttons pressed
simultaneously until InSt CO is displayed.
Binding the room setpoint temperature
1
Press and hold the installation
button on the underfloor heating
controller for 2 seconds.
The
LED lights up. The LED
of zone 1 flashes green.
The underfloor heating controller
is in installation mode and waits
for the CM927 signal.
In order to assign the CM927 to a
different zone, press the installation
button until the LED of the
desired zone ashes green.
!
2
Send the binding signal by
pressing the OK button.
The LED of the selected zone at
the underfloor heating controller
lights continuously orange.
3
Press the installation button at the
underfloor heating controller again.
The red LED at the underfloor
heating controller flashes. It is
possible to connect a separate
room setpoint generator/sensor.
Repeat the process to bind further zones.
Binding the room device CM927 with the underfloor heating controller
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HCE80-R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HCE80-R in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 29,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell HCE80-R

Honeywell HCE80-R User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info