554935
99
Zoom out
Zoom in
Previous page
1/122
Next page
91
Galaxy 2 Series Installation Manual
5 = UCP Operation
This option specifies the coding of UCP SMS operation both from the panel and the replies from the SMS
message centre.
1 = Call Input
This option sets part of the SMS operation message from the panel to the SMS message centre to be 01
(default value).
2 = Call Input sup
This option sets part of the SMS operation message from the panel to the SMS message centre to be 03.
3 = SMS Message
This option sets part of the SMS operation message from the panel to the SMS message centre to be 30.
6 = HW Priority
This option has three sub-options:
1 = Telecoms (Default Setting = 1)
5 = GSM (Default Setting = 0)
6 = STU (Default Setting = 0)
Upon selecting any of these sub options, the engineer is able to select a priority level for that particular device
of 0-2. The priority settings has the following meaning:
0 = This module does not send alarm information. It can only be used for remote servicing.
1 = This module always send alarm signals, dependant on the alarm reporting programming set up in the
modules own menu.
2 = This module will only signal if there is a fault condition on all modules with priority 1.
In this way, you can set up both modules with Priority 1 which means that they all signal all events. More
likely, you set up the Telecom module with priority 1, and the GSM with Priority 2 (or vice versa). That way
the GSM module does not dial unless there is a fault on the Telecom module.
The hardware in use will switch as soon as there is a fault condition on the main hardware path. It will also
switch after all redial attempts have failed on the main path.
7 = Parameters
This menu option has 12 sub-options as follows:
01 = Abort Delay
This is the time that the bells must sound, after an entry timeout alarm, before alarm signalling can occur. The
time is programmable within the range 00-99 seconds. The default is 30 seconds.
02 = PA Delay
This parameter determines the delay between the activation of a full alarm and signalling to the ARC. The PA
Delay is programmable within the range 00-60 seconds. The default is 00 seconds.
56 - Comms (cont’d)
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell Galaxy 2 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell Galaxy 2 Series in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell Galaxy 2 Series

Honeywell Galaxy 2 Series User Manual - Dutch - 20 pages

Honeywell Galaxy 2 Series Usermanual and installation guide - Dutch - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info