554935
84
Zoom out
Zoom in
Previous page
1/122
Next page
76
Galaxy 2 Series Installation Manual
52 - Zones (cont’d)
6 = Groups
This option selects the group that a zone belongs to. The zone will always default to group 1, but can be set to
work under any group.
Zone Functions and Descriptions
00 Not Active
The zone is not active in alarms but tampers are monitored
01 Final
Zones programmed as Final initiate the unsetting procedure and terminate the setting procedure.
NOTE: The setting procedure can only terminate if the Exit Time (Parameter 51.04) is set to zero.
Opening the Final zone when the system or group is set starts the entry timer; opening and then closing the
Final zone during the exit procedure sets the system or assigned groups, providing all the zones are closed.
The opening (+) and closing () of Final zones during the setting and unsetting procedures are recorded in the
event log.
Opening a Final zone during the set procedure is only reported during settling.
02 Exit
Zones that protect the entry and exit routes are programmed as Exit. During the setting and unsetting proce-
dures Exit zones have a non-alarm operation. If the Exit zone is activated while the system is set - without the
unsetting of the group being initiated - an Intruder alarm condition is activated.
Opening a Exit zone during the set procedure is only reported during settling.
03 Intruder
The Intruder function is inactive when the system is unset. When the system is set, activation of an Intruder
zone causes a full alarm activation that requires to be reset with an authorized code.
04 24 Hours
As an intruder zone but permanently active.
NOTE: In the unset state, a 24 hour alarm is signalled. In the set state, an intruder alarm is signalled.
08 Push Set
This zone function is used to terminate the setting routine. The system sets when the Push Set zone, usually a
push button, is activated. The Entry/Exit Horn stops immediately the button is pressed; the system sets after
five seconds, allowing the doors to settle to the closed state. The Push Set zone remains inactive until the next
setting routine.
Only a Push Set zone in the common area will cause all setting areas to set, otherwise it will only set in the
area it is in. This will leave the other setting areas to continue setting until a Push Set zone in their area
activates.
The Push Set zone can be either 1k going to 2k or 2k to 1k - refer to Figure 9
(Keyswitch/Push-Set Zone Wiring) for wiring details.
Activating a Push Set zone during the set procedure is only reported during settling.
NOTE: For this type of zone function to operate, Parameter 51.08, Exit Terminate, has to be set.
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell Galaxy 2 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell Galaxy 2 Series in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell Galaxy 2 Series

Honeywell Galaxy 2 Series User Manual - Dutch - 20 pages

Honeywell Galaxy 2 Series Usermanual and installation guide - Dutch - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info