Manual Honeywell 10288 (page 15 of 20) (English)

689197

Zoom out

Zoom in

1/20

Finial

Finial Cap

Threaded Rod

Hex Nut

Bulb

Rubber Washer

Switch Housing

Rubber

Washer

Fig. 27

Fig. 28

Fig. 26

LIGHT KIT INSTALLATION

27. Feed the fan pull chain from the switch housing

through the off-center hole in the glass bowl. Then,

feed the pull chain from the light kit through the

center hole in the glass bowl, rubber washer and

hex nut (Fig. 27).

28. Lift the glass bowl and rubber washer over the

threaded rod. Screw the hex nut onto the threaded

rod to secure the glass bowl. Feed the pull chains

through the appropriate holes in the nial cap. Lift

the nial cap up until it is ush with the glass bowl

and secure with the nial (Fig. 28).

Proceed to step 31.

26. Install the candelabra-base A15 bulbs (Fig. 26).

1515

Downloaded from www.Manualslib.com manuals search engine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell 10288 in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell 10288 Manual

Product: