Manual Honeywell 10288 (page 13 of 20) (English)

689197

Zoom out

Zoom in

1/20

BLADE INSTALLATION

Fig. 22

Blade Arm

Blade

Screw

Lock

Washer

Blade

Washer

Blade

Blade Arm

Motor Screw

Cutout

Fig. 19

Fig. 21

20. Remove motor screws, motor blocks and washers

from underside of the motor assembly. Discard

the motor blocks and washers but keep the motor

screws for blade arm attachment. (Fig. 20).

Motor Screw

Motor Block Washer

Blade WasherBlade Screw Lock Washer

21. Partially insert the blade screws along with the lock

washers and blade washers through the blade and

into the blade arm. Tighten each blade screw with

a Phillips screwdriver starting with the one in the

middle. Repeat this step for the remaining blades

and blade arms (Fig. 21).

Helpful Hint: A cutout in the tter plate allows easy

access to the motor screw holes.

22. Insert two previously removed motor screws

through one blade arm into the underside of

the motor assembly. Tighten the motor screws

securely with Phillips screwdriver. Repeat for the

remaining blade arms, making sure to completely

secure each blade arm before proceeding to the

next (Fig. 22).

Fig. 20

Motor Screw

Washer

Motor Block

Downloaded from www.Manualslib.com manuals search engine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell 10288 in the language / languages: English as an attachment in your email.

The manual is 3,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell 10288 Manual

Product: