478016

Honda UMS425E Manual

4
Zoom out
Zoom in
Previous page
1/64
Next page
4 EN
FITTING
HANDLES
The handle [1] must be installed
on the transmission tube with the
3 screws and washers supplied
using the Torx wrench [2].
Secure the handle in the most
comfortable position for use.
Fitting is to be performed using
the tools in the kit supplied with
the appliance.
NYLON LINE CUTTING HEAD
1. Block the rotation of the shaft by
inserting the hexagonal wrench [3] in
the appropriate hole [4].
2. Tighten the nylon head on the shaft,
by turning it counterclockwise.
COMPLETE GUARD
Your grass trimmer is supplied with
a guard [5].
1. Install the guard on the machine
with the two screws and washers
supplied with the Torx wrench
[2].
2. Pull down the cover [6] on the
front of the protector.
Never use the grass trimmer without its debris shield.
PRELIMINARY PREPARATION
AND CHECKS
FILLING THE FUEL TANK
The pressure inside fuel
tanks may increase when
the ambient temperature
rises.
The cap should be
removed with care to avoid
any splashing of fuel.
Fuel should be stored in a
cool place, for short
periods of time, and must
never be left in direct
sunlight.
CAUTION:
• Clean the fuel tank cap and its edges to prevent foreign bodies
from entering the tank.
• Fill the fuel tank with a suitable funnel or a jerrycan with a suitable
spout.
• For easy filling, place the machine in the operating position.
• Make sure that the machine remains in a stable position
throughout this operation so that it does not fall over.
Petrol is extremely flammable and, in some circumstances, it
is explosive.
Fill the fuel tank in a well ventilated area with the engine
switched off.
Do not smoke and avoid any flames or sparks in the area where
filling is performed and where the fuel is stored.
Do not overfill the fuel tank (the fuel level must be below the
filler neck).
After filling the tank, make sure that the tank cap is correctly
fitted.
Take care not to spill fuel during the tank filling operation.
Petrol splashes or vapours could catch fire.
Make sure that any spilled petrol has evaporated and that
vapours have dispersed before starting the engine.
Avoid direct contact of petrol with the skin and do not breathe
the vapours.
KEEP FUEL OUT OF REACH OF CHILDREN.
FUEL CONTAINING ALCOHOL
If you intend to use fuel with alcohol, ensure that its octane number
is at least as high as that recommended by Honda (86). There are
two types of fuel/alcohol mixtures: one contains ethanol and the
other methanol.
Do not use mixtures containing more than 10% ethanol, or fuel
containing methanol (methyl or wood alcohol), which do not contain
cosolvents, or corrosion inhibitors for methanol.
In the case of a mixture containing methanol with addition of
cosolvents and corrosion inhibitors, limit the proportion to 5% of
methanol.
NOTE:
The guarantee does not cover damage caused to the fuel
system or engine performance problems resulting from the use of
fuel containing alcohol. Honda does not give its approval to the use
of fuels containing methyl alcohol since their suitability is not yet
proven.
[2] Spark plug wrench/Torx wrench [3] Hexagonal wrench
[A] 765 mm
B3 C11 D3
SAFETY
A1 A4
[A]
[3]
[4]
[2]
[5]
[6]
[5]
Tank capacity 0,58 l (580 cc)
Recommended fuel Premium unleaded
B3 C12
SAFETY
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda UMS425E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda UMS425E in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 15,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info