478015
6
Zoom out
Zoom in
Previous page
1/88
Next page
6 EN
FUEL CONTAINING ALCOHOL
If you intend to use fuel with alcohol, ensure that its octane number
is at least as high as that recommended by Honda (86). There are
two types of fuel/alcohol mixtures: one contains ethanol and the
other methanol.
Do not use mixtures containing more than 10% ethanol, or fuel
containing methanol (methyl or wood alcohol), which do not contain
cosolvents, or corrosion inhibitors for methanol.
In the case of a mixture containing methanol with addition of
cosolvents and corrosion inhibitors, limit the proportion to 5% of
methanol.
NOTE:
The guarantee does not cover damage caused to the fuel
system or engine performance problems resulting from the use of
fuel containing alcohol. Honda does not give its approval to the use
of fuels containing methyl alcohol since their suitability is not yet
proven.
FILLING THE OIL TANK
The engine may be seriously
damaged if it is run with
insufficient oil.
Check the oil level on a flat
horizontal surface with the
engine switched off. The
engine's service life may be
shortened if non-detergent oil
or 2-stroke engine oil is used.
CHECKING THE OIL LEVEL
1. Place the engine in a
horizontal position on a flat
surface.
2. Remove the oil filler cap and
check the oil level: oil must be
level with the top of the oil
tank neck [1].
3. If the level is too low, top up
with the recommended oil to
the top of the oil filler neck.
Use Honda 4-stroke oil or an
equivalent engine oil with
high detergent properties, of
prime quality and certified as complying with American
automobile manufacturer standards for SG and SF
classification.
The machine must always be resting
on the ground when starting up.
Make sure that it is stable and that the
cutting attachment is not touching
other objects or the ground.
BEFORE STARTING UP
Check that the guards are
properly fitted and tightened and
that you have the necessary
protective equipment such as
goggles, gloves, boots and ear-
defenders.
Chek that the cutting attachment and the grips or handle are
correctly tightened.Move the machine away from the location where
the fuel tank was filled.
Stand on flat, stable ground. Check that the spark plug cap is in
place.
STARTING AND STOPPING
THE ENGINE
COLD START
The machine is considered to be "cold" if the engine has not been
running for more than 5 minutes in the 10 minutes before starting
up.
NOTE:
If the ambient temperature is warm enough (summer), the
engine may start without applying the choke.
START THE ENGINE AS FOLLOWS:
1. Place the Start/Stop button [2] in the Start position "I".
2. Place the choke lever [3] in the high position (closed).
3. Press the primer pump button [4] located below the carburettor
several times to prime the engine.
4. Gently pull the recoil starter [5] until you feel resistance.
B3 C12
SAFETY
[1]
C7 C9 C10C1
B1 B2 B5A4
SAFETY
SAFETY
C7
C9 C10
C1
[2]
[2]
[3]
[4]
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda UMK435E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda UMK435E in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 19,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda UMK435E

Honda UMK435E User Manual - English - 18 pages

Honda UMK435E User Manual - German - 18 pages

Honda UMK435E User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info