478015
5
Zoom out
Zoom in
Previous page
1/88
Next page
5 EN
When the machine is equipped with a grass-cutting disc, the disc
must be fitted with the stabilizer (see page 4).
Correct balancing is obtained when the stabilizer just gently touches
the ground [2].
It must be possible to raise the cutting attachment off the ground
with only a slight effort on the handles. If adjustment is required,
move the attachment point [4] forwards if the cutting attachment
feels too heavy or rearwards if it feels too light. Loosen the bolts with
the Torx wrench [3] supplied to move the harness attachment point
to the desired position.
CAUTION: (U type )
Be careful not to pull the throttle cable too tight when moving
the handle [5]. Check that the throttle trigger operates
smoothly.
Adjust the position of the loop handle or the bike handle [5] by
loosening the four bolts to obtain a comfortable operating position.
When you have found the ideal position, check the balance again
and adjust if necessary.
Then securely tighten the bolts to lock the handle in position.
For reference, the standard adjustments are as follows for the
specified types of brushcutter:
FILLING THE FUEL TANK
The pressure inside fuel
tanks may increase when
the ambient temperature
rises. The cap should be
removed with care to avoid
any splashing of fuel. Fuel
should be stored in a cool
place, for short periods of
time, and must never be
left in direct sunlight.
CAUTION:
Clean the fuel tank cap and its edges to prevent foreign bodies
from entering the tank.
Fill the fuel tank with a suitable funnel or a jerrycan with a suitable
spout.
For easy filling, place the machine in the operating position.
Make sure that the machine remains in a stable position
throughout this operation so that it does not fall over.
Petrol is extremely flammable and, in some circumstances, it
is explosive.
Fill the fuel tank in a well ventilated area with the engine
switched off.
Do not smoke and avoid any flames or sparks in the area where
filling is performed and where the fuel is stored.
Do not overfill the fuel tank. (The fuel level must be below the
filler neck).
After filling the tank, make sure that the tank cap is correctly
fitted.
Take care not to spill fuel during the tank filling operation.
Petrol splashes or vapours could catch fire.
Make sure that any spilled petrol has evaporated and that
vapours have dispersed before starting the engine.
Avoid direct contact of petrol with the skin and do not breathe
the vapours.
KEEP FUEL OUT OF REACH OF CHILDREN.
UMK425E1 UMK435E1
L type
[6] 530 mm 545 mm
[7] 760 mm 775 mm
[2]
[2]
[5]
[3]
[4]
[3]
[4]
[5]
[3]
[3]
[7]
[6]
UMK425E1 UMK435E1
U type
[8] 490 mm 500 mm
[9] 740 mm 750 mm
UMK425E1 UMK435E1
Tank capacity 0.58 l (580 cc) 0.63 l (630 cc)
Recommended fuel Premium unleaded
[9]
[8]
B3 C12
SAFETY
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda UMK435E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda UMK435E in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 19,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honda UMK435E

Honda UMK435E User Manual - English - 18 pages

Honda UMK435E User Manual - German - 18 pages

Honda UMK435E User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info