552645
761
Zoom out
Zoom in
Previous page
1/773
Next page
23-6
dummyheaddummyhead
IMMOBILIZER SYSTEM (HISS)
When the ECM/PCM is faulty:
1. Obtain a new ECM/PCM and two new transponder keys.
2. Grind the keys in accordance with the shape of the original key (or use the key number plate when all key have been lost).
3. Replace the ECM/PCM with a new one (page 4-67).
4. Turn the ignition switch ON with a first new key and engine stop switch " ". The HISS indicator comes on for two seconds, then
it blinks four times repeatedly.
The first key is registered in the ECM/PCM.
If there is any problem in the registration, the system will enter the diagnostic mode and the indicator will remain for approx. ten
seconds, then it will indicate the diagnostic code (page 23-7).
5. Turn the ignition switch OFF and remove the first key.
6. Turn the ignition switch ON with a second new key. The HISS indicator comes on for two seconds, then it blinks four times
repeatedly.
The second key is registered in the ECM/PCM.
If there is any problem in the registration, the system will enter the diagnostic mode and the indicator will remain for approx. ten
seconds, then it will indicate the diagnostic code (page 23-7).
7. Turn the ignition switch OFF and remove the second key.
The system (ECM/PCM) will not enter the normal mode unless the two keys are registered in ECM/PCM.
The third new key cannot be continuously registered. When it is necessary to register the third key, follow the procedures "When
the key has been lost, or additional key is required" (page 23-3).
8. Check that the engine can be started using all registered keys.
DIAGNOSTIC CODE INDICATION
Remove the maintenance lid (page 21-6).
Disconnect the CKP sensor 2P (Red) connector [1].
Connect the inspection adaptor [2] to the wire side connector.
Connect the Red clip of the adaptor to the 12 V battery [3] positive (+)
terminal and Black clip to the negative (–) terminal.
Turn the ignition switch ON with the properly registered key and engine stop
switch " ".
The HISS indicator [1] will come on for approx. ten seconds then it will start
blinking to indicate the diagnostic code if the system is abnormal.
The blinking frequency is repeated.
The HISS indicator remains on when the system is normal. (The system is
in the normal mode and the diagnostic code does not appear.)
TOOL:
Inspection adaptor 07XMZ-MBW0101
[3][1]
[2]
[1]
761


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda NC 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda NC 700 in the language / languages: English as an attachment in your email.

The manual is 19,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info