552645
732
Zoom out
Zoom in
Previous page
1/773
Next page
22-9
dummyheaddummyhead
LIGHTS/METERS/SWITCHES
SYSTEM INSPECTION (NC700XD/SD)
Check for loose or poor contact terminals at the
combination meter 16P (Gray) connector.
When the ignition switch is turned ON with the engine
stop switch " ", the combination meter will show the
entire digital display and the tachometer segments [1]
will reduce from full scale to zero.
If the tachometer segment does not show initial
function, check the combination meter power input line
(page 22-10).
If the power and ground lines are OK, replace the
combination meter assembly.
NC700XD (page 22-9)
NC700SD (page 22-9)
If the MIL and engine oil pressure indicator are stay on
and tachometer, high coolant temperature indicator and
HISS indicator does not come on, inspect the following;
DTC with the HDS (page 4-12)
TXD/RXD line (page 22-11)
REMOVAL/INSTALLATION (NC700X/
XA/XD)
Remove the windscreen (page 2-23).
Remove the dust cover [1].
Disconnect the combination meter 16P (Gray)
connector [2].
Remove the screws [3], washer [4] and combination
meter [5].
Installation is in the reverse order of removal.
REMOVAL/INSTALLATION (NC700S/
SA/SD)
Remove the headlight/headlight stay (page 2-27).
Remove the combination meter back cover mounting
screws [1] and combination meter back cover [2].
[1]
TORQUE:
Combination meter mounting screw:
1.0 N·m (0.1 kgf·m, 0.7 lbf·ft)
[2]
[1][3]/[4]
[5]
[1] [2]
732


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honda NC 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honda NC 700 in the language / languages: English as an attachment in your email.

The manual is 19,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info